3V7096 CABLE AS Caterpillar parts
824C, 825C, 826C, 980C, 980F
Rating:
Alternative (cross code) number:
CA3V7096
3V-7096
3V7096
CA3V7096
3V-7096
3V7096
Weight: 1 pounds 0 kg.
Information:
LENGTH
2133.6
mm
MINIMUM BEND RADIUS
178
mm
TRAVEL
50.8
mm
LANDFILL COMPACTOR, WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 3V7096 Cable for Models 824C/825C/826C/980C/980F Caterpillar
CTP For Model 824C/825C/826C/980C/980F Caterpillar || Sold in each || Easy in-and-out fit
CTP For Model 824C/825C/826C/980C/980F Caterpillar || Sold in each || Easy in-and-out fit
CTP 3V7096 Cable for Models 824C/825C/826C/980C/980F Caterpillar
CTP For Model 824C/825C/826C/980C/980F Caterpillar || Sold in each || Easy in-and-out fit
CTP For Model 824C/825C/826C/980C/980F Caterpillar || Sold in each || Easy in-and-out fit
Number on catalog scheme:
14
For full view, you need register
Compatible equipment models: 3V7096:
Information:
Removal Procedure
Start By:
Remove the alternator. Refer to Disassembly and Assembly, "Alternator - Remove and Install".
Remove the belt tensioner. Refer to Disassembly and Assembly, " Belt Tensioner - Remove and Install".
Remove the engine oil cooler. Refer to Disassembly and Assembly, " Engine Oil Cooler - Remove".
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Illustration 1 g01061741
Illustration 2 g00513753
Remove bolts (1) and the washers from tube assembly (2) .
Cut cable strap (3) from tube assembly (2) .
Loosen hose clamps (4) and remove hose (5) .
Remove bolt (8) and the washer.
Remove oil level gauge (7) with the O-ring seal.
Remove bolts (9) and the washers from the alternator bracket.
Remove bolts (10) and the washers.
Remove water pump (6) and the tube assembly. Remove the flange gasket and the O-ring seal.
Remove the tube assembly and O-ring seals from the water pump, if necessary.
Start By:
Remove the alternator. Refer to Disassembly and Assembly, "Alternator - Remove and Install".
Remove the belt tensioner. Refer to Disassembly and Assembly, " Belt Tensioner - Remove and Install".
Remove the engine oil cooler. Refer to Disassembly and Assembly, " Engine Oil Cooler - Remove".
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Illustration 1 g01061741
Illustration 2 g00513753
Remove bolts (1) and the washers from tube assembly (2) .
Cut cable strap (3) from tube assembly (2) .
Loosen hose clamps (4) and remove hose (5) .
Remove bolt (8) and the washer.
Remove oil level gauge (7) with the O-ring seal.
Remove bolts (9) and the washers from the alternator bracket.
Remove bolts (10) and the washers.
Remove water pump (6) and the tube assembly. Remove the flange gasket and the O-ring seal.
Remove the tube assembly and O-ring seals from the water pump, if necessary.
Caterpillar parts catalog:
Parts cable Caterpillar catalog:
1090, 1190, 1190T, 120K, 120K 2, 120M, 120M 2, 1290T, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 1390, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16H, 16M, 21...
120H, 120H ES, 120H NA, 120K, 120K 2, 120M 2, 12K, 12M, 12M 2, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 140M 2, 14M, 160K, 160M, 160M 2, 16M, 2290, 2390, 2391, 2491, 2590, 3126, 3126B, 3126E, 320B, 32...
824C, 825C, 826C, 980C, 980F
824C, 825C, 826C, 980C, 980F
824C, 980C, 980F, 980F II
814B, 815B, 816B, 824C, 966D, 980C
768C, 769C, 769D, 771C, 771D, 824C, 825C
814B, 815B, 816B, 824C, 825C, 826C
815B, 825C, 826C
9V8634
CABLE AS
824C, 826C
824C, 826C
9V8632
CABLE AS
824C, 826C
824C, 826C
824C, 825C
824C, 825C, 826C, 980C, 980F
8R4186
CABLE AS
980C, 980F, 980F II
980C, 980F, 980F II
8R4188
CABLE AS
980C
980C
8R4187
CABLE AS
980C, 980F, 980F II
980C, 980F, 980F II
8R4185
CABLE AS
980C
980C
3V8716
CABLE AS
980C, 980F, 980F II
980C, 980F, 980F II
1008543
CABLE AS
994
994
9X7171
CABLE AS
994
994
1264166
CABLE AS
994
994
1264167
CABLE AS
994, 994D, 994F, 994H
994, 994D, 994F, 994H
824C, 980C, 980F, 980F II
824C, 825C, 826C, 980C, 980F