CABLE AS 4616347 - Caterpillar

Start By:
Install steering frame lock.
Release system hydraulic pressure.
Performance of the cab tilt procedure with foreign objects inside of the cab or with personnel inside of the cab may result in serious injury or death. Before you perform the cab tilt procedure, ensure that the cab is free of all foreign objects, and ensure that the cab is unoccupied. Do not attempt to climb on the cab once the cab is tilted.
Illustration 1 g03632958
Tooling (A) and Tooling (B) are located in the engine compartment.
Illustration 2 g03633036
Illustration 3 g03633041
Remove guards (1) and (2) .
Illustration 4 g03632959
Illustration 5 g03633021
Remove bolts (3). Use Tooling (A) remove pin (4). Repeat for other pin.
Illustration 6 g03634663
Turn valve (5) to the raise position.
Illustration 7 g03632961
Illustration 8 g03633157
Use Tooling (B) to raise cab (6) .Note: Be sure cab (6) is over center and safety cable (7) is tight.Lower Procedure
Illustration 9 g03634663
Turn valve (5) to the lower position.
Illustration 10 g03632961
Use Tooling (B) lower cab (6) .
Illustration 11 g03634731
Install pin (4) and bolts (3) .
Illustration 12 g03633041
Illustration 13 g03633036
Install guards (2) and (1) .
Illustration 14 g03632958
Replace Tooling (A) and Tooling (B) in engine compartment.End By: Remove steering frame lock.