CABLE-BULK 4647394 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1P-1859     Retaining Ring Pliers     1    Note: Check hoses, gaskets, and seals for wear or damage. Replace the components, if necessary.
Illustration 1 g01335491
Install wiper motor (18). Connect harness assembly (17) .
Illustration 2 g01335485
Install screws (16). Tighten the screws to a torque of 5 1 N m (44 9 lb in).
Illustration 3 g01335479
Install mirror (15), cover (14), and screws (13). Tighten the screws to a torque of 6 1 N m (53 9 lb in).
Illustration 4 g01335458
Install gasket (12) and stud (11). Tighten the stud to a torque of 7.5 .5 N m (66 4 lb in). Install washer (8) .
Install gasket (10) and nut (9). Tighten the nut to a torque of 9 1 N m (80 9 lb in). Install cover (7) .
Illustration 5 g01335437
Install wiper arms (6) .
Install washer (5). Use Tooling (A) to install retaining ring (4). Install lockwasher (2) and nut (1). Tighten the nut to a torque of 23 1 N m (17 0.7 lb ft). Connect the hose (3) .
Install covers (not shown).