CABLE AS 5158095 - Caterpillar

Illustration 7 g02275661
Select "START TIME". Press the "OK" key.A screen like Illustration 8 appears.
Illustration 8 g02275662
Use the arrow keys to enter the start time. Press the "OK" key.A screen like Illustration 9 appears.
Illustration 9 g02275663
Select "RUN FOR" time. Press the "OK" key.A screen like Illustration 9 appears.
Illustration 10 g02275775
Use the arrow keys to enter the "RUN FOR" time. Press the "OK" key.A screen like Illustration 11 appears.
Illustration 11 g02275776
Select the output state for output #1. Press the "OK" key.A screen like Illustration 12.
Illustration 12 g02275777
Select the output state to program. Press the "OK" key.A screen like Illustration 13.
Illustration 13 g02275778
Select the output state for output #2. Press the "OK" key.A screen like Illustration 14.
Illustration 14 g02275834
Select the output state to program. Press "OK" key.
Press the escape key to return to the programmable cycle timer main screen. Use the left key and right key to select the other timers. Repeat the Steps above to program the other timers.Configuring the Programmable Cycle Timer using Cat ET
To configure a programmable cycle timer with Cat ET, follow the Steps below:
Connect the ECMP 4 to Cat ET.
Illustration 15 g02275874
Select "Programmable Cycle Timer" on the left.Refer to Illustration 15.
Illustration 16 g02275875
Double-click the "Programmable Cycle Timer #N Activation Day" setpoint for a given day to change this value from the drop-down menu. Click the "OK" button to program.Refer to Illustration 16.
Illustration 17 g02275877
Double-click the "Programmable Cycle Timer #N Activation Start Time" setpoint to change this value. Click the "OK" button to program.Refer to Illustration 17.
Illustration 18 g02275878
Double-click the "Programmable Cycle Timer #N Active Time" setpoint to change this value. Click the "OK" button to program.Refer to Illustration 18.
Illustration 19 g02275881
Double-click the "Programmable Cycle Timer #N Output #1 Active Configuration" setpoint to change this value from the drop-down menu. Click the "OK" button to program.Refer to Illustration 19.
Illustration 20 g02275942
Double-click the "Programmable Cycle Timer #N Output #2 Active Configuration" setpoint to change this value from the drop-down menu. Click the "OK" button to program.Refer to Illustration 20.
Repeat the above Steps to program additional timers.