CABLE 5353862 - Caterpillar

Procedure To Repair 14 To 12 Gauge Wires:
Follow the Special Instruction SEHS9065 for the preparation of the wire. Use the 1U- 5804 Hand Crimp Tool to secure the 8N-1540 Connector Pin and 8N-1541 Connector Socket to the wires. Insert the 8N-1541 Connector Socket into the 129-7163 Plug Assembly. Insert the 8N-1540 Connector Pin into the 129-7164 Receptacle Assembly. Make sure that both are locked into place by tugging on the wires. Mate the 129-7163 Plug Assembly and 129-7164 Receptacle Assembly together and make sure the locking feature is engaged. Secure the plug/receptacle assembly to the harness with a 3S-2093 Cable (Tie-Wrap) Strap. Tighten the cable strap by hand or use a 4C-5877 Cable Tie Tool which tightens and cuts off the excess cable strap at the same time.
The connector pin and socket can be removed from the plug and receptacle assemblies with a 4C-4073 Removal Tool.