CABLE AS 5618510 - Caterpillar

Illustration 1 g03434027
Remove the secondary conveyor upper covers (1) .
Illustration 2 g03434033
Inspect the deflectors for wear parts. Adjust the deflectors or replace the deflectors as required. During normal operations, the deflectors must be registered so to slightly touch the secondary conveyor belt. Adjusting the deflectors will help avoid loss of material from both sides of the secondary conveyor.
Illustration 3 g03434041
Loosen screws (2) and adjust the distance of the deflectors from the secondary conveyor belt. The deflectors have just to touch the surface of the secondary conveyor belt.
Illustration 4 g03434062
Remove screws (2) and plate (3) to remove the deflector (4). Perform this procedure on all deflectors that must be changed along the secondary conveyor. Proceed in the reverse steps to install a new deflector on the secondary conveyor.