CABLE AS 5T4391 - Caterpillar

Illustration 1 g02746301
Center Rear of the ROPS.
Install plate assembly (1) to the top of the ROPS using hardware from the lighting group
Illustration 2 g02746356
Center Rear of the ROPS.
Install bracket assembly (2) using two washers (3) and two bolts (4) .
Install camera group (5) to bracket assembly (2) using existing hardware. The camera group may be packed in a box behind the seat.
Illustration 3 g02746416
Route the camera cable from the rear of the cab and use the three cable straps that are part of the lighting group to strap the camera cable to the lighting harness. Route the camera cable through the rear of the ROPS. The rear ROPS plate is removed for clarity.
Illustration 4 g02746457
Install two clips (6) using the hardware from the lighting group. Connect the cable from the camera to the cable coming through the top of the ROPS. Use cable straps (7) to secure the cable to clips (6) .Installing Optional Dual Camera Arrangement
Table 2
Optional Dual Camera Parts    
Item     Qty     Part Number     Description    
1     1     364-8169     Bracket    
2     4     8T-4121     Hard Washer    
3     4     8T-4136     Bolt    
4     1     459-1800     Camera Gp    
5     5     7K-1181     Cable Strap    
The left-hand camera will be mounted on the fuel tank from the factory.
Illustration 5 g03838850
With a 470 gal fuel tank and a full platform, right -hand camera (4) can go on the platform. This Illustration shows right-hand camera (4) mounted on the platform. If using a 470 gal fuel tank and a modular (half) platform, the second camera will not have a mounting location.
Illustration 6 g03838884
This Illustration shows the harness routing for right-hand camera (4) .
Illustration 7 g03838896
If the machine is equipped with a 505 gal fuel tank, right-hand camera (4) can go on the fuel tank or on the platform. This Illustration shows right-hand camera (4) mounted on the 505 gal fuel tank.
Illustration 8 g03838917
This Illustration shows right-hand camera (4) mounted on the platform.
Install bracket (1) to either the 505 gal fuel tank, or full platform using four bolts (3), and four washers (2) .
Install camera (4) to bracket (1) using the existing hardware included with camera (4) .
Refer to the Illustrations above for routing the harness for camera (4) and assembling camera (4) .