CABLE AS 7T2091 - Caterpillar

Connection Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
B 138-7574 Link Bracket 3
C 1U-9205 Lever Puller Hoist 1
D - Loctite 263 - Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Illustration 2 g03326684
Install O-ring seal (14) to implement pump (13).
Illustration 3 g03326683
Install Tooling (B) and a suitable lifting device to implement pump (13). The weight of implement pump (13) is approximately 86 kg (190 lb).
Install implement pump (13) and two bolts (12).
Illustration 4 g03326686
Install Tooling (B) to the implement pump and both sides of torque converter and updrive gears (9).
Attach Tooling (C) and a suitable lifting device to Tooling (B). The weight of torque converter and updrive gears (9) is approximately 560 kg (1230 lb).
Install O-ring seal (11).
Illustration 5 g03326681
Typical example
Install torque converter and updrive gears (9).
Apply Tooling (D) to the threads of bolts (10).
Install 22 bolts (10). Tighten 22 bolts (10) to a torque of 74 8 N m (55 6 lb ft).
Illustration 6 g03326161
Connect electrical connectors (7).
Position the wiring harness. Install the bolt to clip (8).
Install hose assembly (6).
Illustration 7 g01109554
Install O-ring seal (5) to steering, pilot, and braking pump (4).
Illustration 8 g01109545
Install Tooling (A) and a suitable lifting device to steering, pilot, and braking pump (4). The weight of steering, pilot, and braking pump (4) is approximately 60 kg (130 lb).
Install steering, pilot, and braking pump (4) and two bolts (3).
Illustration 9 g01109553
Install bracket (2) and four bolts (1).End By:
Install the engine, torque converter, and updrive gears. Refer to Disassembly and Assembly, "Engine, Torque Converter and Updrive Gears - Install".