CABLE AS 8C5604 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench As 1
Turn the fuel supply to the OFF position and turn the power disconnect switch to the OFF.
Disconnect the harness assembly (not shown).
Illustration 1 g02175143
Drain the primary filter and use Tooling (A) in order to remove the primary filter (1). Refer to Operation and Maintenance Manual, "Fuel System Primary Filter (Water Separator) Element - Replace".
Illustration 2 g02175165
Remove check valve (2). Remove backup ring (3), O-ring seals (4) and (5).
Illustration 3 g02175476
Remove nut (6) and remove coil (7).
Remove cartridge (8). Remove backup ring (11), and remove O-ring seals (9) and (10).
Illustration 4 g02175494
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove plug (15) and remove the O-ring seal. Remove spring (14), valve (12) and O-ring seal (13). Repeat this step for the other check valve assembly.
Remove the Fuel Priming Pump. Refer to Disassembly and Assembly Manual, "Fuel Priming Pump - Remove and Install".