CABLE AS 8T5297 - Caterpillar

Illustration 1 g00526298 (1) Tighten the nut that fastens the rack to the lever to the following torque. ... 17 7 N m (13 5 lb ft) (2) Set the shaft end play between the lever and the flange assembly to the following value. ... 2.0 0.5 mm (0.08 0.02 inch) (3) Flange assembly Bore in the bearing in the flange assembly ... 19.044 0.007 mm (0.7498 0.0003 inch)Diameter of shaft at bearing ... 19.00 0.02 mm (0.748 0.001 inch) (4) Bracket assembly Bore in bearing in the bracket assembly ... 19.044 0.007 mm (0.7498 0.0003 inch)Diameter of shaft at bearing ... 19.00 0.02 mm (0.748 0.001 inch)Tighten flange assembly (3) and tighten cover assembly (5) before tightening bracket assembly (4). (5) Cover assembly Bore in bearing in the cover assembly ... 19.00 0.02 mm (0.748 0.001 inch)Diameter of shaft at bearing ... 19.00 0.02 mm (0.748 0.001 inch)
Illustration 2 g00513898 (6) Set adjustable rod to the following value between centers of the rod ends. ... 248.5 mm (9.78 inch)
Illustration 3 g00513899 (7) Bearings should be pressed to the following depth. ... 13.3 0.3 mm (0.52 0.01 inch)