9X1147 CABLE AS Caterpillar parts
916, 926, D3C III, D4C III, D5C III, G926, IT18B, IT28B
Rating:
Alternative (cross code) number:
CA9X1147
9X-1147
9X1147
CA9X1147
9X-1147
9X1147
Weight: 1 pounds 0 kg.
Information:
LENGTH
1850
mm
MINIMUM BEND RADIUS
102
mm
TRAVEL
50.8
mm
INTEGRATED TOOLCARRIER, WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
9X1147 Cable A Fits Caterpillar 3046 D5C PAT D5C PATLGP D3C III D4C III D5C III
Generic Package included: 1x 9X1147 Cable A Fits Caterpillar 3046 D5C PAT D5C PATLGP D3C III D4C III D5C III as the picture . || High-Performance Efficiency: gineered for maximum efficiency, this product delivers exceptional performance without compromising on quality. It’s a versatile replacement suitable for various applications. || Identify the model: USE Ctrl + F to SEARCH your model number inside the Product Description. || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours
Generic Package included: 1x 9X1147 Cable A Fits Caterpillar 3046 D5C PAT D5C PATLGP D3C III D4C III D5C III as the picture . || High-Performance Efficiency: gineered for maximum efficiency, this product delivers exceptional performance without compromising on quality. It’s a versatile replacement suitable for various applications. || Identify the model: USE Ctrl + F to SEARCH your model number inside the Product Description. || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours
Fits Caterpillar CABLE A 9X1147
Generic Package included: 1x Fits Caterpillar CABLE A 9X1147 as the picture . || High-Performance Efficiency: gineered for maximum efficiency, this product delivers exceptional performance without compromising on quality. It’s a versatile replacement suitable for various applications. || Identify the model: USE Ctrl + F to SEARCH your model number inside the Product Description. || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours
Generic Package included: 1x Fits Caterpillar CABLE A 9X1147 as the picture . || High-Performance Efficiency: gineered for maximum efficiency, this product delivers exceptional performance without compromising on quality. It’s a versatile replacement suitable for various applications. || Identify the model: USE Ctrl + F to SEARCH your model number inside the Product Description. || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours
Number on catalog scheme:
6
For full view, you need register
Compatible equipment models: 9X1147:
Information:
Use this procedure if the following event code is active. Refer to Troubleshooting, "Event Codes" for information about event codes.Note: The following code may not be applicable for certain applications.
Table 1
Diagnostic Trouble Codes
CDL Code Code Description Comments
E225 (3) Engine Overcrank The code is logged.
The fuel is shut off. Engine cranking is prevented. Probable Causes
Diagnostic Codes
Starting Aids (if applicable)
Load
Fuel Supply
Battery
Charging Circuit
StarterRecommended Actions
Note: The procedures have been listed in order of probability. Complete the procedures in order.
Table 2
Troubleshooting Test Steps Values Results
1. Check for Associated Diagnostic Trouble Codes
A. Establish communication between the Caterpillar Electronic Technician (ET) and the ECM. Refer to Troubleshooting, "Electronic Service Tools", if necessary.
B. Download the "Warranty Report" from the engine ECM before performing any troubleshooting or clearing diagnostic trouble codes.
Troubleshoot any associated diagnostic codes that are present before continuing with this procedure.
Associated codes
Result: An associated diagnostic trouble code is not active or logged.
Proceed to Test Step 2.
Result: An associated code is active or logged.
Troubleshoot the associated codes before continuing with this procedure.
Refer to Troubleshooting, "Diagnostic Trouble Codes" in order to troubleshoot the associated diagnostic code.
2. Starting Aids (if applicable)
A. If cold ambient conditions exist, check the operation of the starting aids.
B. Verify that the starting aid is operating correctly.
Starting aids are operational
Result: The starting aid is operating correctly.
Proceed to Test Step 3.
Result: The starting aid is not operating correctly.
Refer to the appropriate circuit test in order to troubleshoot the starting aid.
3. Excessive Loads
A. Check for an excessive load on the engine.
B. If necessary, disengage the driven equipment and test the engine.
Excessive load
Result: The are excessive loads on the engine.
Reduce the load on the engine. Return the unit to service.
Result: The are not excessive loads on the engine.
Proceed to Test Step 4.
4. Inspection of the Fuel Supply
A. Visually check the fuel level in the fuel tank. Do not rely on the fuel gauge only.
B. Ensure that the fuel supply valve (if equipped) is in the full OPEN position.
C. Check the fuel quality.
Make sure that the fuel meets the requirements of Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations ".
D. Inspect the fuel system.
Refer to Systems Operation/Testing and Adjusting, "Fuel System" for additional information.
Cold weather adversely affects the characteristics of the fuel. Refer to the engine Operation and Maintenance Manual for information on improving the characteristics of the fuel during cold-weather operation.
Fuel level
Result: The fuel level is OK.
Proceed to Test Step 5.
Result: The fuel level is not OK.
Fill the tank. STOP.
If necessa
Table 1
Diagnostic Trouble Codes
CDL Code Code Description Comments
E225 (3) Engine Overcrank The code is logged.
The fuel is shut off. Engine cranking is prevented. Probable Causes
Diagnostic Codes
Starting Aids (if applicable)
Load
Fuel Supply
Battery
Charging Circuit
StarterRecommended Actions
Note: The procedures have been listed in order of probability. Complete the procedures in order.
Table 2
Troubleshooting Test Steps Values Results
1. Check for Associated Diagnostic Trouble Codes
A. Establish communication between the Caterpillar Electronic Technician (ET) and the ECM. Refer to Troubleshooting, "Electronic Service Tools", if necessary.
B. Download the "Warranty Report" from the engine ECM before performing any troubleshooting or clearing diagnostic trouble codes.
Troubleshoot any associated diagnostic codes that are present before continuing with this procedure.
Associated codes
Result: An associated diagnostic trouble code is not active or logged.
Proceed to Test Step 2.
Result: An associated code is active or logged.
Troubleshoot the associated codes before continuing with this procedure.
Refer to Troubleshooting, "Diagnostic Trouble Codes" in order to troubleshoot the associated diagnostic code.
2. Starting Aids (if applicable)
A. If cold ambient conditions exist, check the operation of the starting aids.
B. Verify that the starting aid is operating correctly.
Starting aids are operational
Result: The starting aid is operating correctly.
Proceed to Test Step 3.
Result: The starting aid is not operating correctly.
Refer to the appropriate circuit test in order to troubleshoot the starting aid.
3. Excessive Loads
A. Check for an excessive load on the engine.
B. If necessary, disengage the driven equipment and test the engine.
Excessive load
Result: The are excessive loads on the engine.
Reduce the load on the engine. Return the unit to service.
Result: The are not excessive loads on the engine.
Proceed to Test Step 4.
4. Inspection of the Fuel Supply
A. Visually check the fuel level in the fuel tank. Do not rely on the fuel gauge only.
B. Ensure that the fuel supply valve (if equipped) is in the full OPEN position.
C. Check the fuel quality.
Make sure that the fuel meets the requirements of Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations ".
D. Inspect the fuel system.
Refer to Systems Operation/Testing and Adjusting, "Fuel System" for additional information.
Cold weather adversely affects the characteristics of the fuel. Refer to the engine Operation and Maintenance Manual for information on improving the characteristics of the fuel during cold-weather operation.
Fuel level
Result: The fuel level is OK.
Proceed to Test Step 5.
Result: The fuel level is not OK.
Fill the tank. STOP.
If necessa
Caterpillar parts catalog:
Parts cable Caterpillar catalog:
933, 935B, 935C, 939, D3B, D3C II, D3C III, D4C III, D5C III
9V7254
CABLE AS
916, 926, IT28
916, 926, IT28
6W4868
CABLE AS
916, 926, 926A, IT18B, IT28B
916, 926, 926A, IT18B, IT28B
6W3257
CABLE AS
926
926
9V7253
CABLE AS
926, IT28
926, IT28
926, 926A, G926, IT28, IT28B
926, 926A, G926, IT28, IT28B
8V7944
CABLE AS
916, 926, 926A, IT18, IT28
916, 926, 926A, IT18, IT28
7T6157
CABLE AS
916, IT18, IT18B
916, IT18, IT18B
7T6156
CABLE AS
916, IT18, IT18B
916, IT18, IT18B
9C6532
CABLE AS
916, 926, 926A, IT18B, IT28B
916, 926, 926A, IT18B, IT28B
9C6531
CABLE AS
916, 926, 926A, IT18B, IT28B
916, 926, 926A, IT18B, IT28B
D6H, D6H XL, D6H XR
6W3628
CABLE
120H, 120H NA, 120K, 120K 2, 12H, 12H NA, 12K, 135H, 135H NA, 140H, 140H NA, 140K, 140K 2, 143H, 160H, 160H NA, 160K, 163H NA, 554, 564, 574B, 916, 926, 966D, 980F, D3C II, D4H, D4H XL, D4HTSK II, D5H...
120H, 120H NA, 120K, 120K 2, 12H, 12H NA, 12K, 135H, 135H NA, 140H, 140H NA, 140K, 140K 2, 143H, 160H, 160H NA, 160K, 163H NA, 554, 564, 574B, 916, 926, 966D, 980F, D3C II, D4H, D4H XL, D4HTSK II, D5H...
9U8585
CABLE AS
D4H, D4H XL, D4HTSK II, D4HTSK III
D4H, D4H XL, D4HTSK II, D4HTSK III
8G5384
CABLE AS
D4H, D4H XL, D4HTSK II, D4HTSK III, R1300G
D4H, D4H XL, D4HTSK II, D4HTSK III, R1300G
6I8864
CABLE AS
D4H, D4H XL, D4HTSK III
D4H, D4H XL, D4HTSK III
9U8584
CABLE AS
D4H, D4H XL, D4HTSK III
D4H, D4H XL, D4HTSK III
1015500
CABLE AS
933, 939, D3C III, D4C III, D5C III
933, 939, D3C III, D4C III, D5C III
1015501
CABLE AS
933, 939, D3C III, D4C III, D5C III
933, 939, D3C III, D4C III, D5C III
933, 939, D3C III, D4C III, D5C III
1126452
CABLE AS
933, 939, D3C III, D4C III, D5C III
933, 939, D3C III, D4C III, D5C III
933, 939, D3C III, D4C III, D5C III
5G3518
CABLE GP
933, 933C, 939, 939C, D3B, D3C, D3C III, D3G, D4C III, D4G, D5C III, D5G
933, 933C, 939, 939C, D3B, D3C, D3C III, D3G, D4C III, D4G, D5C III, D5G