CAGE-BEARING 1052433 - Caterpillar

Illustration 1 g03548738The screen represented in Illustration 1 contains four performance page quadrants and a scroll bar. The first screen is intended to provide a consistent first performance page for all operators. The parameters on the other performance pages can be configured through the Display Settings Menu. The headings of each cell will appear whenever this screen is active for 5 seconds. To reduce the busyness of the screen and reduce the amount of light emitted into the cab, the headings will disappear after 5 seconds.AutoLube System
Illustration 2 g03547544
AutoLube Screen
The AutoLube performance page and mode setting is an optional feature based on the installation status of the 3rd-party autolube system. If the AutoLube "Active Duty Mode" status parameter is available when the display is powered ON, the performance page and "Active Duty Mode" setting will be displayed. The performance page and "Active Duty Mode" setting will continue to be displayed even if the datalink message is lost. If the parameters are not available to be displayed, the data for the parameter will be replaced with asterisks after 20 seconds. If the AutoLube Active Duty Mode Status parameter is not available when the display is powered on, the performance page and Active Duty Mode setting will not be displayed.The currently active selection is colored whereas the other options are grayed out:
Pressing "Left" will move the colored selection to the next item to the left. If there is not an item to the left, the selection will scroll (move to the first item on the right).
Pressing "Right" will move the colored selection to the next item to the right. If there is not an item to the right, the selection will scroll (move to the first item on the left).AutoLube Start/Stop
Illustration 3 g03513761The CMPD will temporarily pause the normal AutoLube pump operation based on the "Machine Idle Status" reported by the Transmission/Chassis ECM.The AutoLube "Pump Status" on the performance page will show "Halted" when the Machine Idle status is either Stop, shutdown, or Idle. When the Machine Idle status is Not Idle, or no message is received, the Pump status changes to "Operating".