CAGE 1538929 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 3
Illustration 1 g01274159
Install O-ring seal (18) on the retarder and bearing cage (17).
Illustration 2 g01274095
Typical Example
Attach Tooling (A) and a suitable lifting device to the retarder and bearing cage (17). The weight of the retarder and bearing cage (17) is approximately 363 kg (800 lb). Position the retarder and bearing cage (17) onto the machine.
Illustration 3 g01274093
Typical Example
Install bolts (16) to the retarder and bearing cage (17).
Illustration 4 g01274091
Connect tube assembly (15).
Illustration 5 g06102814
Connect hose assemblies (11), and (12). Install clip (14). Install screen assembly (13) and hose assembly (13A).
Illustration 6 g01274066
Connect harness assembly (9) and hose assemblies (8) and (10).
Illustration 7 g01274063
Connect hose assemblies (6) and (7).
Illustration 8 g01274055
Use two people to position tube assembly (5). The weight of tube assembly (5) is approximately 24 kg (52 lb). Install bolts (4).
Fill the transfer gear case with oil. Refer to Operation and Maintenance Manual, "Lubrication Viscosities and Refill Capacities".
Illustration 9 g01274035
Attach Tooling (A) and a suitable lifting device to hood (3). The weight of hood (3) is approximately 50 kg (110 lb). Install hood (3).
Illustration 10 g01274033
Install bolts (2). Install hose (1).
Refill the fuel tank. Refer to Operation and Maintenance Manual, "Lubrication Viscosities and Refill Capacities".End By:
Install the scavenge pump and mounting (flywheel).