CAGE 2D9323 - Caterpillar

A pressure hazard is present. Severe personal injury or death can result from removing hoses or fittings that are under pressure. Relieve the pressure in the system before you remove hoses or fittings.
The Centro-Matic Lubrication System
Reference: Before any service work is performed on the lubrication system, refer to Special Instructions, REHS1394 or consult your Caterpillar dealer.Bulk Fill
In order to fill the reservoir, remove the lower and upper plugs from the side of the reservoir.
Attach the appropriate pump to the lower inlet.
Fill the reservoir until visual indicator on the lid of the tank indicates FULL or until the grease appears at the top vent port. Reference: For the correct type of grease, refer to Operation and Maintenance Manual, "Lubricant Viscosities".
Remove the pump and replace both plugs. The Quicklub Lubrication System
Reference: Before any service work is performed on the lubrication system, refer to Special Instructions, REHS1396 or consult your Caterpillar dealer.Filling the Reservoir
Fill the reservoir through the grease fitting. The grease fitting is located at the base of the reservoir. Reference: For the correct type of grease, refer to Operation and Maintenance Manual, "Lubricant Viscosities".
Refill the reservoir when the grease reaches the "MIN" mark on the reservoir.
Fill the reservoir to the "MAX" mark on the reservoir. Priming the System
After the reservoir has been filled with the recommended lubricant, loosen the fitting to the supply line. Operate the pump until lubricant flows from the outlet. Then, tighten fitting.