CAGE AS 4761904 - Caterpillar

4761904 CAGE AS Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4761904
476-1904
4761904

Weight: 15 pounds 6 kg.

Buy CAGE AS 4761904 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 20

Caterpillar 4761904 Parts scheme CAGE AS

For full view, you need register

Information:

Removal Procedure
Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Release hydraulic system pressure. Refer to Disassembly and Assembly, "System Pressure - Release".
Drain the hydraulic oil tank for the steering system. For the correct procedure, refer to Operation and Maintenance Manual, "Steering and Hydraulic Fan System Oil - Change" for the machine that is being serviced.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Note: Put identification marks on all lines, on all hoses, on all wires and on all tubes. Plug all lines, all hoses and all tubes. This will help to prevent fluid loss and this will help to keep contaminants from entering the system.
Illustration 1 g00320515
Disconnect hose assembly (1), tube assembly (3) and harness assembly (2) from selector and pressure control valve (5) .
Remove bolts (4) and selector and pressure control valve (5) .Installation Procedure
Illustration 2 g00320515
Install selector and pressure control valve (5) and bolts (4) .
Connect hose assembly (1), tube assembly (3) and harness assembly (2) to selector and pressure control valve (5) .End By:
Fill the hydraulic system with oil. Refer to Operation and Maintenance Manual, "Steering and Hydraulic Fan System Oil - Change" for the machine that is being serviced.
Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".