CAGE-BEARING 5T5966 - Caterpillar

Illustration 2 g03700899
Disconnect hose assembly (3).
Disconnect harness assembly (4).
Illustration 3 g03700900
Cut cable strap (6) that secures harness assembly (5) to the clip.
Cut cable strap (8) that secures harness assembly (7) to the clip.
Position harness assembly (5) and harness assembly (7) out of the way.
Illustration 4 g06253336
Remove bolt (9) and disconnect the three harness assemblies.
Remove bolt (10) and disconnect the ground strap.
Illustration 5 g06253344
Remove bolt (11) and the washer.
Remove six bolts (12) and the six washers.
Position hose assembly (13) out of the way.
Illustration 6 g03700904
Remove bolt (14) and the washer.
Illustration 7 g06253350
Remove two bolts (15), the two washers, the plate, and the clamps.
Remove bolt (17) and the washer. Position the hose assembly out of the way.
Remove bracket assembly (16).
Illustration 8 g03700906
Remove four bolts (18) and position filter assembly (19) out of the way.
Illustration 9 g03700907
Remove six bolts (20) and the six washers.
Illustration 10 g06253352
Remove six bolts (21), the six washers, and plate assembly (22) from generator and drive (23).
Illustration 11 g03700909
Disconnect hose assembly (24) from generator and drive (23).
Disconnect harness assembly (25) from generator and drive (23).
Illustration 12 g03701905
Disconnect harness assemblies (26) from generator and drive (23).
Illustration 13 g06253355
Disconnect hose assembly (27) from generator and drive (23).
Illustration 14 g06253405
Illustration 15 g03701911
Attach Tooling (A) and a suitable lifting device to generator and drive (23). The weight of generator and drive (23) is approximately 318 kg (700 lb).
Remove 12 bolts (28) and the 12 washers.
Remove two bolts (29) and the two washers.
Remove generator and drive (23).Installation Procedure
Install generator and drive (23) in the reverse order of removal.
Apply a 3 1 mm (0.12 0.04 inch) bead of Tooling (B) to plate assembly (22) and bracket assembly (16) within 3 minutes of seal application.
Tighten six bolts (20) to a torque of 6 1 N m (53 9 lb in).
Tighten bolt (9) to a torque of 27 5 N m (239 44 lb in).