CAGE 6S3181 - Caterpillar

TARGET="_parent">Engine - Clean
Engine Oil Level Gauge - Calibrate
Engine Storage Procedure - Check
Fuel System - Prime
Maintenance Recommendations
Sea Water Strainer - Clean/Inspect
Severe Service Application - Check
Zinc Rods - Inspect/Replace
Daily
Closed Crankcase Ventilation (CCV) Filter Service Indicator - Check
Coolant Level - Check
Engine Air Cleaner Service Indicator - Inspect
Engine Oil Level - Check
Fuel System Primary Filter/Water Separator - Drain
Walk-Around Inspection
Every 50 Service Hours or Weekly
Sea Water Strainer - Clean/Inspect
Zinc Rods - Inspect/Replace
Every 5700 L (1500 US gal) of Fuel or 150 Service Hours for Engines Used in Severe Applications
Engine Oil Sample - Obtain
Engine Oil and Filter - Change
First 5700 L (1500 US gal) of Fuel or 200 Service Hours
Engine Valve Lash - Check
Initial 250 Service Hours (or at first oil change)
Injector Bolt Torque - Inspect
Every 500 Service Hours
Coolant Sample (Level 1) - Obtain
Every 140 000 L (37 000 US gal) of Fuel or 5000 Service Hours
Maintenance Recommendations
Overhaul (Major)
Every 56 800 L (15 000 US gal) of Fuel or 2000 Service Hours
Alternator - Inspect
Coolant Temperature Regulator - Replace
Crankshaft Vibration Damper - Inspect
Engine Mounts - Inspect
Engine Speed/Timing Sensor - Clean/Inspect
Engine Valve Lash - Check
Starting Motor - Inspect
Water Pump - Inspect
Every Year
Coolant Sample (Level 2) - Obtain
Every 17 000 L (4500 US gal) of Fuel or 500 Service Hours
Closed Crankcase Ventilation (CCV) Fumes Disposal Filter - Replace
Turbocharger - Inspect
PM Level 1 - Every 5700 L (1500 US gal) of Fuel or 200 Service Hours or 1 Year
Aftercooler Condensate Drain Valve - Inspect/Clean
Auxiliary Water Pump (Rubber Impeller) - Inspect
Battery Electrolyte Level - Check
Belts - Inspect/Adjust/Replace
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
Engine Crankcase Breather - Clean
Engine Oil Sample - Obtain
Engine Oil and Filter - Change
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel System Secondary Filter - Replace
Fuel Tank Water and Sediment - Drain
Hoses and Clamps - Inspect/Replace
Every 28 400 L (7500 US gal) of Fuel or 1000 Service Hours or 2 Years
Aftercooler Core - Clean/Test
Heat Exchanger - Inspect
Injector Bolt Torque - Inspect
Every 3000 Service Hours or 3 Years
Coolant (DEAC) - Change
Every 6000 Service Hours or 3 Years
Coolant Extender (ELC) - Add
Every 12 000 Service Hours or 6 Years
Coolant (ELC) - Change
Every 6 Years
Aftercooler Core - Replace