CAGE-BRG 6T1731 - Caterpillar

Image1.3.1
10. Install a 263-5846 Body (9) to each 7I-1036 Adapter (8) with one 3K-0360 O-ring Seal (10). Tighten each 263-5846 Body (9) to a torque of 110 +/- 17 Nm (81 +/- 13 lb ft).
11. Install a 3526554/">352-6554 Valve Group (11) to each 263-5846 Body (9). Tighten the 3526554/">352-6554 Valve Group (11) to a torque of 24 +/- 3 Nm (18 +/-2 lb ft). Refer to Image 1.4.1.
Image1.4.1
12. Install a 6V-9874 Adapter (12) to each 263-5846 Body (9) with a 3K-0360 O-ring Seal (10). Tighten each 6V-9874 adapter (12) to a torque of 110 +/- 17 Nm (81 +/- 13 lb ft). Refer to Image 1.5.1.
13. Install a 390-7591 Hose (13) to each 6V-9874 Adapter (12) with a 6V-9746 O-ring Seal (4).
14. Install the opposite end of each 390-7591 Hose (13) to the 261-7957 Adapter (3) with a 6V-9746 O-ring Seal (4).
15. Tighten the swivel nut on each end of each 390-7591 (13) hose to a torque of 160 +/- 24 Nm (118 +/- 18 lb ft). Refer to Image 1.5.1.
Image1.5.1
16. Install a 6V-9853 Adapter (14) to the 261-7957 Adapter (3) with a 6V-9746 O-ring Seal (4). Tighten the 6V-9853 Adapter (14) to a torque of 160 +/- 24 Nm (118 +/- 18 lb ft). Refer to Image 1.6.1.
17. Install hose assembly (D) in Step 1 to the 6V-9853 Adapter (14) with a 6V-9746 O-ring Seal (4). Tighten the swivel nuts to a torque of 160 +/- 24 Nm (118 +/- 18 lb ft). Refer to Image 1.6.1.
Image1.6.1
18. Install a 390-5013 Hose (15) to each 6V-9839 Adapter (7) with a 6V-9746 O-ring Seal (4).
19. Install a 6V-8629 Adapter (16) at each brake group with a 2M-9780 O-ring Seal (6).
20. Install the opposite of the 390-5013 Hose (15) to the 6V-8629 Adapter (16) with a 6V-9746 O-ring Seal.
21. Tighten the swivel nut on each end of each 390-5013 Hose (15) to a torque of 160 +/- 24 Nm (118 +/- 18 lb ft). Refer to Image 1.7.1 and Image 1.7.2
Image1.7.1
Image1.7.2
22. Install a 9M-8406 Clip (17) to each steel line (F) and a 6D-4636 Clip (18) to each 390-5013 Hose (15) and secure them with an 8T-4182 Bolt (19), two 8T-4121 Washers (20), a 3W-9670 Boss (21) and an 8T-4133 Nut (22). Tighten each bolt to a torque of 55 +/- 10 Nm (41 +/- 7 lb ft). Refer to Image 1.8.1.
Image1.8.1
23. Install a 6D-4636 Clip (18) to each 390-5013 Hose (15) with an 8T-5030 Bolt (23), 8T-4121 Washer (20), and 7L-6463 Spacer (24). Tighten each bolt to a torque of 55 +/- 10 Nm (41 +/- 7 lb ft). Refer to Image 1.9.1.
Image1.9.1