AVSPARE.COM
parts catalog

CAGE 7G6041 - Caterpillar


7G6041 CAGE Caterpillar parts
Rating:
16
Alternative (cross code) number:
CA7G6041
7G-6041
7G6041
Caterpillar 7G6041 CAGE
Weight: 21 pounds 9 kg.

Buy CAGE 7G6041 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g03084640
Illustration 2 g03084656
View of section (A-A)
( 1) 258-9954 Fuel Fitting
Illustration 3 g03084658
View of section (B-B)
( 2) 365-9924 Adapter
Illustration 4 g03085820
View of section (C-C)
( 3) 260-0401 Screw
Illustration 5 g03085864
View of detail (D)
( 4) 8T-2223 Bolt
Table 1
Specification for the High Pressure Common Rails
Lubricate O-rings and ends of quill tube with clean engine oil prior to assembly.
Item Part Specification Description
1 258-9954 Fuel Fitting Torque to 250 10 N m (184 7 lb ft)
2 365-9924 Adapter Torque to 150 10 N m (111 7 lb ft)
3 260-0401 Screw Torque to 250 10 N m (184 7 lb ft)
4 8T-2223 Bolt Torque to 40 5 N m (30 4 lb ft)
Illustration 6 g03085416
(5) Clamp Assembly
(6) Clamp Assembly
(7) High-pressure fuel line
(8) Return fuel line
(9) Bolt
(10) Washers
Table 2
Specification for 327-0844 Fuel Injection Lines Gp and 315-5619 Fuel Injection Lines Gp
Note: Perform the following procedure to install the rear fuel lines.
Note: Lubricate the ends of the lines with clean engine oil prior to installation.
1. Insert fuel line (7) into both fuel rails.
2. Attach fuel line (7) into the fuel rails using bolts (9) and washers (10).
3. Evenly hand tighten bolts (9).
4. Install and tighten return fuel line (8) into both fuel rails.
5. Install clamps (5) and (6).
6. Tighten clamps (5) and (6) mounting hardware hand tight.
7. Tighten the right side bolts (9) to 20 N m (15 lb ft). Do not rotate the bolts more than 90 degrees at one time.
8. Tighten the left side bolts (9) to 20 N m (15 lb ft). Do not rotate the bolts more than 90 degrees at one time.
9. Tighten the right side bolts (9) to 40 N m (30 lb ft). Do not rotate the bolts more than 90 degrees at one time.
10. Tighten the left side bolts (9) to 40 N m (30 lb ft). Do not rotate the bolts more than 90 degrees at one time.
11. Tighten clamps (5) and (6) mounting hardware to standard torque.
Illustration 7 g06240928
(11) 506-0089 Limiter As
(12) 258-9942 Cap
(13) 506-0091 Spring Shim
(14) 506-0090 Spring


Parts cage Caterpillar catalog:

7G6043 CAGE
Caterpillar
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.