CAGE 7T9939 - Caterpillar

Illustration 1 g00708005
Inspect the dash panel for broken lenses, indicator lights, and switches.Caterpillar Monitoring System Functional Test
To ensure proper operation of the CMS, check the system on a daily basis.
Illustration 2 g00708021
On - The battery disconnect switch must be ON in order to supply electrical power to the machine so that the electrical systems will function.
On - The engine start switch key (1) must be turned to the ON position in order to supply electrical power to the operator's compartment so that the CMS will function. Turn the engine start key to the ON position. The system should act in the following manner:
The indicator lights on the top portion of the instrument panel come on briefly.
The action light comes on briefly.
The auxiliary action light comes on briefly.
The indicator lights on the bottom portion of the instrument panel flash briefly.
The action alarm sounds briefly.
The pointers on the gauges point upward. Then, the pointers point to the left. Then, the pointers point to the right. Then, the pointers point to the final position.If the system functions properly, start the engine. If any of the following events occur, do not start the engine:
The indicator lights on the top portion or the bottom portion of the instrument panel do not come on.
The action light does not come on.
The auxiliary action light does not come on.
The action alarm does not sound.Complete any necessary repairs before you start the engine.
Panel Test Switch - With a stopped engine, push on test switch (2). Service hours will appear in the display area until the switch is pushed. Push the switch and release the switch until the desired information appears in the display area. The following type of information is displayed:
Total Service Hours
Service hours in forward gear
Service hours in reverse gear
Fault codes