CAGE AS-BEARING 9P3222 - Caterpillar

The following two coolants are used in Caterpillar diesel engines:Preferred - Caterpillar Extended Life Coolant (ELC) or a commercial extended life coolant that meets the Caterpillar EC-1 specificationAcceptable - A Caterpillar Diesel Engine Antifreeze/Coolant (DEAC) or a commercial heavy-duty coolant/antifreeze that meets "ASTM D4985", or "ASTM D6210" specificationsNote: Caterpillar DEAC does not require a treatment with an SCA at the initial fill. A commercial heavy-duty coolant/antifreeze that meets "ASTM D4985" or "ASTM D6210" specifications MAY require a treatment with an SCA at the initial fill. These coolants WILL require a treatment with an SCA on a maintenance basis.
Table 4
Service Life Before Flushing and Before Refilling
Coolant Service Life(1)(2)
Cat ELC 965,606 kilometers (600,000 miles)
Commercial coolant that meets the Caterpillar EC-1 specification 482,803 kilometers (300,000 miles)
Cat DEAC 321,869 kilometers (200,000 miles)
Commercial Heavy-Duty Coolant/Antifreeze that meets "ASTM D4985" or "ASTM D6210" 241,402 kilometers (150,000 miles)
(1) Which ever comes first
(2) Refer to the specific engine Operation and Maintenance Manual, "Maintenance Interval Schedule" for the Cooling System Water Temperature Regulator IntervalGlycol
Glycol in the coolant helps to provide protection against the following conditions:
Boiling
Freezing
Cavitation of the water pump and cylinder linersFor optimum performance, Caterpillar recommends a 1:1 mixture of a water/glycol solution.Note: Use a mixture that will provide protection against the lowest ambient temperature.Note: 100 percent pure glycol will freeze at a temperature of −23 °C (−9 °F). Refer to tables 5 and 6for additional information.Most conventional heavy-duty coolant/antifreezes use ethylene glycol. Propylene glycol may also be used. In a 1:1 mixture with water, ethylene and propylene glycol provide similar protection against freezing and boiling. Refer to tables 5 and 6 for additional information.
Table 5
Ethylene Glycol
Concentration Freeze Protection Boil Protection
50 Percent −37 °C (−34 °F) 106 °C (223 °F)
60 Percent −51 °C (−60 °F) 111 °C (232 °F)
Do not use propylene glycol in concentrations that exceed 50 percent glycol because of propylene glycol's reduced heat transfer capability. Use ethylene glycol in conditions that require additional protection against boiling or freezing.
Table 6
Propylene Glycol
Concentration Freeze Protection Boil Protection
50 Percent −32 °C (−26 °F) 106 °C (223 °F) To check the concentration of glycol, use the 1U-7298 Coolant/Battery Tester (Degree Celsius) or use the 1U-7297 Coolant/Battery Tester (Degree Fahrenheit). The testers give readings that are immediate and accurate. The testers can be used with ethylene or propylene glycol.Note: Propylene glycol coolant used in Caterpillar Diesel Engine cooling systems must meet "ASTM D6211-98a "Fully-Formulated Propylene Glycol-Based Engine Coolant for Heavy-Duty Engines". When Propylene glycol is used in heavy-duty diesel engines, regular addition of Supplemental Coolant Additive (SCA) is required for liner cavitation protection. Consult your Caterpillar dealer for more information.S O S Coolant Analysis
Testing the engine coolant is important to ensure that the engine is protected from internal cavitation and from corrosion. The analysis also tests the ability of the coolant to protect the engine from boiling and from freezing. The S O S Coolant Analysis can be done at your Caterpillar dealer. Caterpillar S O S Coolant Analysis is