CAM 0830721 - Caterpillar

Illustration 2 g00780845
Attach a lifting strap and a hoist to tow arm (6) .
Remove bolt (4) and pin (5) that fastens tow arm (6) to cylinder (3). Lower the tow arm to the ground.
Illustration 3 g00780846
Remove bolts (8). Remove bolt (7), plate (9) and the spacer.
Illustration 4 g00780851
Attach lifting straps and a hoist to auger conveyor (10). The weight of the auger conveyor is 567 kg (1250 lb).
Illustration 5 g00780848
Remove the cotter pin and pin (12) that fastens cylinder (11) to the auger conveyor.
Repeat Steps 2, 3, 4 and 6 for the other side of the machine.
Illustration 6 g00780854
Loosen four jam nuts (13) and four bolts (14) .
Illustration 7 g00780855
Illustration 8 g00780978
Remove four bolts (15) and step assembly (16) .
Remove four bolts (17). Remove two bars (19), auger conveyor (10) and slide assembly (18) from the machine. Installation Procedure
Illustration 9 g00780978
Illustration 10 g00780855
Use lifting straps and a hoist to position slide assembly (18) and auger conveyor (10) on the machine. Install two bars (19) and four bolts (17). Install step assembly (16) and four bolts (15) .
Illustration 11 g00780854
Note: Tighten four bolts (14) enough to remove the free play.
Tighten four bolts (14) and four jam nuts (13) .
Illustration 12 g00780848
Install pin (12) and the cotter pin that fastens cylinder (11) to the auger conveyor. Install the pin and cotter pin on the opposite side of the machine.
Remove the lifting straps and the hoist.
Illustration 13 g00780846
Install the spacer, plate (9) and bolt (7). Install bolts (8) .
Illustration 14 g00780845
Use a lifting strap and a hoist to position tow arm (6) .
Install pin (5) and bolt (4) that fastens tow arm (6) to cylinder (3) .
Repeat Steps 5, 6 and 7 for the opposite side of the machine.
Illustration 15 g00780832
Install three hose assemblies (2) on both motors (1) .End By: Install the transverse beam. Refer to Disassembly and Assembly, "Transverse Beam - Remove and Install".