CAMSHAFT AS 1086277 - Caterpillar

Illustration 32 g03355473
Use Tooling (B) to remove retaining ring (56).
Remove plug (57) and the O-ring seal.
Illustration 33 g03355503
Use Tooling (C) and Tooling (H) to remove cover (58).
Illustration 34 g03355505
Remove O-ring seal (59) and carrier assembly (60).
Illustration 35 g03355791
Remove gear (61). Remove retaining rings (62). Remove gears (63).
Remove retaining ring (64) and gear (65).
Illustration 36 g03727570
Remove retaining rings (66). Remove gears (67).
Remove bearing race (68).
Illustration 37 g03362981
Use Tooling (E) to remove bearing (69) and shaft seal (70).
Illustration 38 g03355806
Illustration 39 g03355801
Drill the stakes from nut (71). Install Tooling (K). Attach Tooling (J) and Tooling (L) to Tooling (K) and Tooling (G).
Remove nut (71) from the spindle.
Illustration 40 g03355938
Use Tooling (M) and a suitable press to remove spindle (72) from housing (55).
Illustration 41 g03355939
Remove Duo-Cone seals (73) and (74).
Stand Option
Table 2
Required Tools List
Item Part Number Part Name
A FT-0996 Reaction Arm(1)
B 6V-6080 Torque Multiplier Gp
C 1P-2420 Transmission Repair Stand
D 426-2717 Reaction Plate(1)
- 426-2723 Adapter
- 308-5676 Wrench
- 308-5675 Driver Assembly
(1) These items are only needed when the 1P-2420 Transmission Repair Stand is used. Not needed for the dealer bench option.
Illustration 42 g06215937
Stand option
(A) FT-0996 Reaction Arm
(B) 6V-6080 Torque Multiplier Gp
(C) 1P-2420 Transmission Repair Stand
(D) 426-2717 Reaction Plate