10R0654 CAMSHAFT-LH Caterpillar parts
Rating:
Alternative (cross code) number:
CA10R0654
10R-0654
10R0654
CA10R0654
10R-0654
10R0654
Weight: 93 pounds 42 kg.
Related part:
10R0654
KIT-CAMSHAFT
20R4887
R
7C0674
CAMSHAFT-LH
10R0654
R
Information:
Illustration 1 g00037327
Before you service the machine or before you repair the machine, attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls. These warning tags Special Instruction, SEHS7332 are available from your Caterpillar dealer.Know the width of your equipment in order to maintain proper clearance near fences, boundary obstacles, etc.Wear a hard hat, protective glasses and other protective equipment in order to accommodate job conditions.Do not wear loose clothing or jewelry that can catch on controls or on other parts of the machine.Ensure that all protective guards and all covers are secured in place on the machine.Keep the machine free from foreign material. Check the deck, the walkways and the steps. Remove debris, oil, tools and other items.Secure all loose items that are not a part of the machine. Secure lunch boxes, tools and other items.Know the appropriate work site hand signals. Also, know the personnel that are authorized to give the hand signals. Accept signals from one person only. Do not smoke when you service an air conditioner. Also, do not smoke if refrigerant gas may be present. Inhaling the fumes that are emitted from a flame that contacts air conditioner refrigerant can cause bodily harm or death. Inhaling gas from air conditioner refrigerant through a lighted cigarette can cause bodily harm or death.Never put maintenance fluids into glass containers. Drain all liquids into a suitable container.When you discard liquids, obey all local regulations.Use all cleaning solutions with care.Report all necessary repairs.Do not allow unauthorized personnel on the machine.Unless you are instructed otherwise, perform the maintenance with the following conditions:
The machine is parked on level ground.
The attachment controls are in HOLD position.
The direction/speed control lever is in NEUTRAL position.
The transmission lock lever is in the LOCKED position.
Lower the blade until the blade exerts a slight downward pressure onto the ground.
The engine is stopped.
The engine start switch in the OFF position and the key is removed.
The disconnect switch is in the OFF position and the key is removed.Pressure Air
Pressure air can cause personal injury. When pressure air is used for cleaning, wear a protective face shield, protective clothing and protective shoes.The maximum air pressure must be below 205 kPa (30 psi) for cleaning purposes.Trapped Pressure
Pressure can be trapped in a hydraulic system. Trapped pressure can cause sudden machine movement or attachment movement. Use caution if you disconnect hydraulic lines or fittings. High pressure oil that is released can cause a hose to whip. High pressure oil that is released can cause oil to spray. Fluid penetration can cause serious injury and possible death. Fluid Penetration
When you check for a leak, use a board or cardboard. Leaking fluid that is under pressure can penetrate body tissue. Fluid penetration can cause serious injury and possible death. A pin hole leak can cause severe injury. If fluid is injected into your skin, you must obtain treatment immediately. Seek treatment from a doctor that is familiar with this type of injury.Asbestos Information
Caterpillar
Parts camshaft Caterpillar catalog:
10R0653
CAMSHAFT-RH
Caterpillar
Caterpillar
10R0656
CAMSHAFT-FR (RH)
Caterpillar
Caterpillar
10R0655
CAMSHAFT-RR (LH)
Caterpillar
Caterpillar
0R8704
CAMSHAFT-RR (LH)
Caterpillar
Caterpillar
0R8703
CAMSHAFT-FR (RH)
Caterpillar
Caterpillar
0R4357
CAMSHAFT AS
Caterpillar
Caterpillar
20R3461
CAMSHAFT AS-FR
Caterpillar
Caterpillar
20R3460
CAMSHAFT AS-REAR
Caterpillar
Caterpillar
20R3457
CAMSHAFT-FR
Caterpillar
Caterpillar
20R3846
CAMSHAFT AS-FR
Caterpillar
Caterpillar
20R3845
CAMSHAFT AS-REAR
Caterpillar
Caterpillar
20R3840
CAMSHAFT-FR RH
Caterpillar
Caterpillar