CAMSHAFT AS-RH 10R0662 - Caterpillar

(1) Diameter of carrier tread (new) ... 187.4 0.50 mm (7.38 .020 in) Minimum permissible carrier tread diameter ... 168.4 mm (6.63 in)(2) Assemble ground face to end of shaft and bearing.(3) Torque for plug ... 170 20 N m (125 15 lb ft) Rubber torics and all surfaces contacting them must be clean and dry at assembly. Apply a thin film to contacting surfaces of the metal seal rings just prior to assembly. Seal rings must be assembled square with the bore and toric and must not be bulged or twisted. Put lubricant on all other seals at assembly.