CAMSHAFT-FRONT 1332966 - Caterpillar

1332966 CAMSHAFT-FRONT Caterpillar parts 3512, PM3512

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1332966
133-2966
1332966

Weight: 58 pounds 26 kg.

Buy CAMSHAFT-FRONT 1332966 Caterpillar genuine, new aftermarket tractor parts with delivery
GEN SET ENGINE, VEHICULAR ENGINE,

Related part:

1332966 CAMSHAFT-FR (RH) 0R8720 R

1332966 KIT-CAMSHAFT 20R4892 R

This part in 2 request: Show. This information for suppliers only!

#1403876 133-2966

2024-08-12

#1045832 1332966

2023-01-24

Compatible equipment models: 1332966:

GEN SET ENGINE 3512

GENERATOR SET

INDUSTRIAL ENGINE

LOCOMOTIVE ENGINE

MARINE ENGINE

PETROLEUM ENGINE

POWER MODULE PM3512

VEHICULAR ENGINE 3512 Caterpillar

Number on catalog scheme: 7

Caterpillar 1332966 Parts scheme CAMSHAFT-FRONT

For full view, you need register

Information:

Turn the battery disconnect switch to the off position.
Drain the engine coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
Drain the hydraulic fluid. Refer to Operation and Maintenance Manual, Hydraulic System Oil - Change for the correct draining and filling procedures.
Illustration 1 g06148972
Disconnect hose (1). Disconnect hose (3) and pull through hole in shield (2).
Illustration 2 g06148980
Illustration 3 g06149039
Remove screw (5) and disconnect hose assemblies (4).
Disconnect hose assemblies (6) and (7). Disconnect harness assembly (8).
Illustration 4 g06149347
Disconnect harness assembly (9) and remove all cable ties (15). Disconnect harness assembly (14). Disconnect hose (13) and pull through shield (12). Disconnect hose assembly (10). Remove grommet (11) and pull hose assembly (10) through hole in shield (12).
Illustration 5 g06149366
Remove bolt and clip (16), gauge assembly (19), and grommet (18). Pull hose assembly (17) through the shield and install gauge assembly (19) into hose assembly (17).
Illustration 6 g06149407
Illustration 7 g06149425
Remove bolt (20) and reposition clip (21). Disconnect hose assembly (22). Disconnect harness assembly (254). Remove bolts (24) and reposition monitor group (23).Remove bolts (26) and reposition sensor assembly (27).
Illustration 8 g06149432
Disconnect hose assembly (28).
Illustration 9 g06150337
Disconnect hose (29).
Illustration 10 g06150938
Remove bolts (30) and cover (31).
Illustration 11 g06150955
Illustration 12 g06150346
Some items removed for clarity.
Disconnect hose assemblies (33) and (34). Disconnect wiring harnesses (32).Note: Wire colors may vary from machine to machine. Be sure to disconnect the wires coming from a separate wiring harness.Remove 2 wires from connector (36) and pull through opening (35).
Illustration 13 g06150359
Attach a suitable lifting device.
Illustration 14 g06150384
Remove bolts (38). Repeat on opposite side.Remove cooling system package (37).Installation Procedure
Install cooling system package (36) in the reverse order of removal.