AVSPARE.COM
parts catalog

CAMSHAFT KIT 1400026 - Caterpillar



1400026 CAMSHAFT KIT Caterpillar parts CAMSHAFT
Rating:
61
Alternative (cross code) number:
CA1400026
140-0026
1400026
Caterpillar 1400026 CAMSHAFT KIT
Weight: 114 pounds 52 kg.

Buy CAMSHAFT KIT 1400026 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


TYPICAL ILLUSTRATION1. Assemble complete brake group with no shims (1) under retainer (3).2. Put flange end of wheel spindle (4) down.3. Tighten bolts (2) to a torque of 25 lb. ft. (35 N m) while spindle housing (6) is turned.4. Remove bolts (2) and retainer (3), but do not turn housing (6).5. Measure distance from end of spindle (4) to end of sprocket (5). Make a record of this measurement.6. Install shims (1) of the thickness found in Step 5 minus .005 to .010 in. (0.13 to 0.25 mm). If total shim thickness is more .040 in. (1.02 mm), use 9D7085 Shim as part of the shim thickness needed. If total shim thickness is more than .060 in. (1.52 mm), use two 9D7085 Shims as part of the shim thickness needed.7. Install retainer (3) and tighten bolts to a torque of ... 95 5 lb. ft.(135 7 N m)


Parts camshaft Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.