CAMSHAFT GP-SINGLE 1N4406 - Caterpillar

Safety
Most accidents involving product operation, maintenance, and repair occur through failure to observe basic safety rules or operations. An accident can often be avoided by being alert and recognizing potentially hazardous situations before an accident occurs. Any individuals performing product operation, maintenance, or repair should have the necessary training, skills, and tools required to perform the functions properly and safely. The safety information in this manual serves as a basic guide in an attempt to prevent injury or death.Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard. The warnings in this publication and on the product are, therefore, not all inclusive. If a tool, procedure, work method, or operating technique that is not specifically mentioned by Caterpillar is used, you must satisfy yourself that it is safe for you and for others. Make sure the product or machine will not be damaged or be made unsafe by any operation, lubrication, maintenance, or repair procedures that you choose.If any doubt arises about the correct, safe method of performing any steps of these procedures, DO NOT proceed. Seek out expert assistance from a qualified person.
To avoid personal injury or death, carefully read and understand all instructions before attempting to operate any equipment. Do not operate or work on a machine unless you read and understand the instructions and warnings in this and all other applicable manuals. Contact CSTG for replacement manuals. Proper care is your responsibility. Always follow all State and Federal health and safety laws and/or local regulations.
To avoid eye injury, always wear protective glasses or face shield. Make sure no one can be injured by flying objects or debris when using tools or working on a component.
Clean up all leaked or spilled fluids immediately. Oil or fuel leaked or spilled onto any hot surfaces or electrical components can cause a fire, resulting in personal injury or death.
Personal injury can result from slips or falls. DO NOT leave tools or components laying around the work area and clean up all spilled fluids immediately.
Personal injuries can occur as a result of using pressurized air. Maximum air pressure at the nozzle must be below 205 kPa (30 psi) for cleaning purposes. Wear protective clothing, protective glasses, and a protective face shield when using pressure air.
Caterpillar reserves the right to make technical changes for product improvement. This manual may contain illustrations and photographs, for demonstration purposes, which slightly deviate from the actual product design.Vibration Analyzer Group
Illustration 1. 169-0720 Vibration Analyzer Group. References
General Description
This Tool Operating Manual is meant to supplement the existing operating manuals for the CSi analyzer. It is not a stand-alone document. It is meant to be a Quick Guide to get started and for the unique Caterpillar applications.The 169-0717 Vibration Analyzer is a microprocessor-based device for collecting, analyzing, and displaying dynamic data. With the 169-0735 Field Balance Group, it also is a complete stand-alone balance analyzer with up to four plane capability. In addition to linear vibration data, torsional vibration data can be acquired with the