CAMSHAFT AS 2177139 - Caterpillar

Illustration 24 g06037680
Illustration 25 g06037678
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spring (27) and guide (28) into the control assembly.
Install cup (29), spring (30), spool (31), and spring (32) into sleeve assembly (26).
Install sleeve assembly (26). Apply downward pressure to sleeve assembly (26) to install setscrew (27) and nut (28) in the hole in sleeve assembly (26).
Illustration 26 g06037677
Install O-ring seal (26) into block (25).
Illustration 27 g06037676
Install block (25) and bolts (24).
Illustration 28 g06037674
Install cartridge assembly (23), the O-ring seal, and solenoid assembly (22). Tighten cartridge assembly to a torque of 19 0.5 N m (168.00 4.40 lb in).
Illustration 29 g06037673
Install the O-ring seal and nut (21).
Illustration 30 g06037671
Rotate the pump with the shaft pointing downwards.
Install adapter (19), plug (20), and the O-ring seals.
Illustration 31 g06037670
Install plate (18), screws (17), and the O-ring seal.
Illustration 32 g06037663
Install cover (16), bolts (15), and the O-ring seal.
Illustration 33 g06037667
Illustration 34 g06037669
Install screen (14) as shown.
Install plugs (11), (12), (13), and the O-ring seals.
Illustration 35 g06037664
Install plug (9) and the O-ring seal.
Install Elbow assembly (10) and the O-ring seal.
Illustration 36 g06037659
Install O-ring seal (8) onto flange (7).
Illustration 37 g06037661
Install flange (7), bolts (4), and O-ring seal (5).
Install adapter (6).
Illustration 38 g06037657
Install hub (1), washer (2), and bolt (3).End By:
Install the piston pump.