2202673 CAMSHAFT GP Caterpillar parts
416D, 420D, 428D, 430D, 432D, 438D, 442D
Rating:
Alternative (cross code) number:
CA2202673
220-2673
2202673
CA2202673
220-2673
2202673
BACKHOE LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Sunsong 2202673 Brake Hydraulic Hose
Sunsong Each Brake Hose is precision engineered to exact fit and Includes brackets, grommets, molded plastic guards, wire clips, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Brake Hoses exceed DOT, Federal vehicle safety Standards (FMVSS 106) and sae J1401 standards with a burst pressure rating of 8, 700 psi, and a tensile strength of 560 lb. Durability test (Whip test) results exceed original equipment requirements by 300% || All tubing is manufactured from high grade Steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Every Brake Hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new Hose || Brake Hoses with banjo end Fittings include new Copper washers to ensure proper sealing
Sunsong Each Brake Hose is precision engineered to exact fit and Includes brackets, grommets, molded plastic guards, wire clips, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Brake Hoses exceed DOT, Federal vehicle safety Standards (FMVSS 106) and sae J1401 standards with a burst pressure rating of 8, 700 psi, and a tensile strength of 560 lb. Durability test (Whip test) results exceed original equipment requirements by 300% || All tubing is manufactured from high grade Steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Every Brake Hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new Hose || Brake Hoses with banjo end Fittings include new Copper washers to ensure proper sealing
$16.57
04 Oct 2023
0.32[0.14] pounds
Amazon.com
Sunsong 2202673 Brake Hydraulic Hose
Sunsong Each Brake Hose is precision engineered to exact fit and Includes brackets, grommets, molded plastic guards, wire clips, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Brake Hoses exceed DOT, Federal vehicle safety Standards (FMVSS 106) and sae J1401 standards with a burst pressure rating of 8, 700 psi, and a tensile strength of 560 lb. Durability test (Whip test) results exceed original equipment requirements by 300% || All tubing is manufactured from high grade Steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Every Brake Hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new Hose || Brake Hoses with banjo end Fittings include new Copper washers to ensure proper sealing
Sunsong Each Brake Hose is precision engineered to exact fit and Includes brackets, grommets, molded plastic guards, wire clips, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Brake Hoses exceed DOT, Federal vehicle safety Standards (FMVSS 106) and sae J1401 standards with a burst pressure rating of 8, 700 psi, and a tensile strength of 560 lb. Durability test (Whip test) results exceed original equipment requirements by 300% || All tubing is manufactured from high grade Steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Every Brake Hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new Hose || Brake Hoses with banjo end Fittings include new Copper washers to ensure proper sealing
$19.16
17 May 2023
0.32[0.14] Pounds
Amazon.com
Sunsong 2202673 Brake Hydraulic Hose
Sunsong Each Brake Hose is precision engineered to exact fit and Includes brackets, grommets, molded plastic guards, wire clips, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Brake Hoses exceed DOT, Federal vehicle safety Standards (FMVSS 106) and sae J1401 standards with a burst pressure rating of 8, 700 psi, and a tensile strength of 560 lb. Durability test (Whip test) results exceed original equipment requirements by 300% || All tubing is manufactured from high grade Steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Every Brake Hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new Hose || Brake Hoses with banjo end Fittings include new Copper washers to ensure proper sealing
Sunsong Each Brake Hose is precision engineered to exact fit and Includes brackets, grommets, molded plastic guards, wire clips, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Brake Hoses exceed DOT, Federal vehicle safety Standards (FMVSS 106) and sae J1401 standards with a burst pressure rating of 8, 700 psi, and a tensile strength of 560 lb. Durability test (Whip test) results exceed original equipment requirements by 300% || All tubing is manufactured from high grade Steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Every Brake Hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new Hose || Brake Hoses with banjo end Fittings include new Copper washers to ensure proper sealing
Number on catalog scheme:
For full view, you need register
Information:
Front Bottom Guard
Illustration 1 g03877062
Position Tooling (A) and suitable cribbing under front bottom guard (2). Remove bolts (1) and front bottom guard (2).The weight of front bottom guard (2) is approximately 35 kg (77 lb). Middle Bottom Guard (Remove)
Illustration 2 g03877076
Position Tooling (A) under middle bottom guard (5). Remove pins (3), bolts (4), and middle bottom guard (5). The weight of middle bottom guard (5) is approximately 44 kg (97lb). Middle Bottom Guard (Lower)
Illustration 3 g03889671
Remove the center two bolts (4).
Illustration 4 g03889669
Install Tooling (B) and hand tighten the nut and washer against middle bottom guard (5). Remove remaining bolts (4) from middle bottom guard (5).
Illustration 5 g03889673
While keeping the forcing bolts from turning, evenly loosen the nuts lowering middle bottom guard (5) enough to install Tooling (C). Attach a suitable lifting device to Tooling (C). The weight of middle bottom guard (5) is approximately 44 kg (97lb).
While supporting middle bottom guard (5), Remove Tooling (B). With Tooling (B) removed, lower middle bottom guard (5) to the ground. Rear Bottom Guard
Illustration 6 g03877109
Position Tooling (A) under rear bottom guard (8). Remove bolts (6), pins (7), and rear bottom guard (8). The weight of rear bottom guard (8) is approximately 64 kg (141 lb). Rear Bottom Guard (Lower)
Illustration 7 g03889787
Remove two bolts (6).
Illustration 8 g03889790
Install Tooling (D) and hand tighten the nut and washer against rear bottom guard (8). Remove the remaining bolts (6).
Illustration 9 g03889791
Anchor a suitable lifting strap to a fixed object, like the hitch pin, in the back of the machine. Route the suitable lifting strap under rear bottom guard (8) to a suitable lifting device in the front of the machine. The weight of rear bottom guard (8) is approximately 64 kg (141 lb). While keeping the forcing bolts from turning, evenly loosen the nuts lowering rear bottom guard (8) onto the suitable lifting strap. Once the weight of rear bottom guard (8) is fully supported by the suitable lifting strap, remove Tooling (D).
Use the suitable lifting device to lower rear bottom guard (8). Installation Procedure
Install or raise the bottom guards in the reverse order of removal.
Illustration 1 g03877062
Position Tooling (A) and suitable cribbing under front bottom guard (2). Remove bolts (1) and front bottom guard (2).The weight of front bottom guard (2) is approximately 35 kg (77 lb). Middle Bottom Guard (Remove)
Illustration 2 g03877076
Position Tooling (A) under middle bottom guard (5). Remove pins (3), bolts (4), and middle bottom guard (5). The weight of middle bottom guard (5) is approximately 44 kg (97lb). Middle Bottom Guard (Lower)
Illustration 3 g03889671
Remove the center two bolts (4).
Illustration 4 g03889669
Install Tooling (B) and hand tighten the nut and washer against middle bottom guard (5). Remove remaining bolts (4) from middle bottom guard (5).
Illustration 5 g03889673
While keeping the forcing bolts from turning, evenly loosen the nuts lowering middle bottom guard (5) enough to install Tooling (C). Attach a suitable lifting device to Tooling (C). The weight of middle bottom guard (5) is approximately 44 kg (97lb).
While supporting middle bottom guard (5), Remove Tooling (B). With Tooling (B) removed, lower middle bottom guard (5) to the ground. Rear Bottom Guard
Illustration 6 g03877109
Position Tooling (A) under rear bottom guard (8). Remove bolts (6), pins (7), and rear bottom guard (8). The weight of rear bottom guard (8) is approximately 64 kg (141 lb). Rear Bottom Guard (Lower)
Illustration 7 g03889787
Remove two bolts (6).
Illustration 8 g03889790
Install Tooling (D) and hand tighten the nut and washer against rear bottom guard (8). Remove the remaining bolts (6).
Illustration 9 g03889791
Anchor a suitable lifting strap to a fixed object, like the hitch pin, in the back of the machine. Route the suitable lifting strap under rear bottom guard (8) to a suitable lifting device in the front of the machine. The weight of rear bottom guard (8) is approximately 64 kg (141 lb). While keeping the forcing bolts from turning, evenly loosen the nuts lowering rear bottom guard (8) onto the suitable lifting strap. Once the weight of rear bottom guard (8) is fully supported by the suitable lifting strap, remove Tooling (D).
Use the suitable lifting device to lower rear bottom guard (8). Installation Procedure
Install or raise the bottom guards in the reverse order of removal.
Caterpillar SIS machinery equipment:
Caterpillar SIS
416D Backhoe Loader BFP00001-17198 (MACHINE) POWERED BY 3054 Engine »
220-2673
CAMSHAFT GP
430D Backhoe Loader BNK00001-02501 (MACHINE) POWERED BY 3054 Engine »
220-2673
CAMSHAFT GP
430D Backhoe Loader BML00001-02280 (MACHINE) POWERED BY 3054 Engine »
220-2673
CAMSHAFT GP
428D Backhoe Loader BLL00001-00650 (MACHINE) POWERED BY 3054 Engine »
220-2673
CAMSHAFT GP
428D Backhoe Loader BMT00001-01617 (MACHINE) POWERED BY 3054 Engine »
220-2673
CAMSHAFT GP
432D Backhoe Loader BLD00001-01594 (MACHINE) POWERED BY 3054 Engine »
220-2673
CAMSHAFT GP
442D Backhoe Loader BRG00001-00827 (MACHINE) POWERED BY 3054 Engine »
220-2673
CAMSHAFT GP
416D Backhoe Loader BGJ00001-00522 (MACHINE) POWERED BY 3054 Engine »
220-2673
CAMSHAFT GP
416D Backhoe Loader BKG00001-01299 (MACHINE) POWERED BY 3054 Engine »
220-2673
CAMSHAFT GP
416D Backhoe Loader BFP05178-17198 (MACHINE) POWERED BY 3054 Engine »
220-2673
CAMSHAFT GP
420D Backhoe Loader FDP07199-18399 (MACHINE) POWERED BY 3054 Engine »
220-2673
CAMSHAFT GP
420D Backhoe Loader BLN04544-10299 (MACHINE) POWERED BY 3054 Engine »
220-2673
CAMSHAFT GP
430D Backhoe Loader BNK02502-05899 (MACHINE) POWERED BY 3054 Engine »
220-2673
CAMSHAFT GP
430D Backhoe Loader BML02281-04799 (MACHINE) POWERED BY 3054 Engine »
220-2673
CAMSHAFT GP
428D Backhoe Loader BLL00651-00712 (MACHINE) POWERED BY 3054 Engine »
220-2673
CAMSHAFT GP
428D Backhoe Loader BMT01618-03227 (MACHINE) POWERED BY 3054 Engine »
220-2673
CAMSHAFT GP
432D Backhoe Loader BLD01595-03844 (MACHINE) POWERED BY 3054 Engine »
220-2673
CAMSHAFT GP
438D Backhoe Loader BPE00664-00742 (MACHINE) POWERED BY 3054 Engine »
220-2673
CAMSHAFT GP
442D Backhoe Loader BRG00828-01122 (MACHINE) POWERED BY 3054 Engine »
220-2673
CAMSHAFT GP
416D Backhoe Loader BGJ00523-01315 (MACHINE) POWERED BY 3054 Engine »
220-2673
CAMSHAFT GP
420D Backhoe Loader BKC00502-UP (MACHINE) POWERED BY 3054 Engine »
220-2673
CAMSHAFT GP
420D Backhoe Loader BMC00611-UP (MACHINE) POWERED BY 3054 Engine »
220-2673
CAMSHAFT GP
416D Backhoe Loader BKG01300-UP (MACHINE) POWERED BY 3054B Engine »
220-2673
CAMSHAFT GP
416D Backhoe Loader BFP12900-UP (MACHINE) POWERED BY 3054C Engine »
220-2673
CAMSHAFT GP
Caterpillar parts catalog:
Parts camshaft Caterpillar catalog:
1458504
CAMSHAFT GP
3054, 312B L, 315B L, 416C, 416D, 420D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 908
3054, 312B L, 315B L, 416C, 416D, 420D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 908
2337236
CAMSHAFT GP
3054C, 414E, 416D, 422E, 424D, C4.4, CB-434D, CS-323C, CS-423E
3054C, 414E, 416D, 422E, 424D, C4.4, CB-434D, CS-323C, CS-423E
1853195
CAMSHAFT GP
3054B, 416D, 424D, CS-423E
3054B, 416D, 424D, CS-423E
1854617
CAMSHAFT GP
3054B, 416D, 424D
3054B, 416D, 424D
3054, 3054B, 312B L, 312C, 315B L, 416C, 416D, 420D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 554, 908, AP-800C, BG-225B, BG-225C, CB-434C, CB-534C, CB-535B, CP-433C, CP-433E, CS-323C, CS...
3576810
CAMSHAFT
3054B, 416D, 424D, CS-423E, TH210, TH215
3054B, 416D, 424D, CS-423E, TH210, TH215
3054C, 3054E, 315C, 414E, 416D, 416E, 422E, 422F, 424D, 432E, AP-300, C4.4, CB-434D, CS-323C, CS-423E, M313C, M315C, TH210, TH215, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
3054C, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 416D, 416E, 420D, 420E, 422E, 424D, 428D, 428E, 430D, 432D, 432E, 434E, 442D, 914G, AP-650B, AP-800D, C4.4, CB-534D, CB-564D, CD-54, CP-433E, CP-533E...
1427297
CAMSHAFT GP
446B, 446D, 924F, IT24F
446B, 446D, 924F, IT24F
3115846
CAMSHAFT GP
C1.5, C1.6, C2.2, CB-22, CB-34
C1.5, C1.6, C2.2, CB-22, CB-34
3412490
CAMSHAFT GP
G3508, G3508B
G3508, G3508B
2051324
CAMSHAFT GP
3126, 3126B, 3126E
3126, 3126B, 3126E
6I1533
CAMSHAFT GP
3176, 75, 75C
3176, 75, 75C
4P5222
CAMSHAFT GP
789, 793, 994
789, 793, 994
1193744
CAMSHAFT GP
3196, 85D, 85E, 95E, C-12
3196, 85D, 85E, 95E, C-12
933, 939, 939C, D3C III, D3G, D4C III, D4G, D5C III, D5G
3S0534
CAMSHAFT
980
980
1064582
CAMSHAFT GP
3508, 3508B, 3508C, 5130B, 776D, 777, 777B, 777C, 777D, 854G, 992G, D11N, D11R, PM3508
3508, 3508B, 3508C, 5130B, 776D, 777, 777B, 777C, 777D, 854G, 992G, D11N, D11R, PM3508
2400040
CAMSHAFT GP
3013C, C1.5
3013C, C1.5