CAMSHAFT-FUEL PUMP 2W0254 - Caterpillar

Illustration 1 g01006650
For maximum service life of the machine, perform a daily walk-around inspection. Note: Watch closely for leaks. If leaking is observed, find the source of the leak and correct the leak. If leaking is suspected or leaking is observed, check the fluid levels more frequently.Inspect the machine for the following items:
Inspect the hydraulic system for leaks. Repair any hydraulic system leaks. Inspect the hoses, the seals, and the flanges.
Inspect the final drive for leaks. Repair any final drive leaks.
Inspect the transmission for leaks. Repair any transmission leaks. Check around the seals and around the covers. Also, check the hoses around the transmission.
Inspect the engine compartment for leaks and repair any engine compartment leaks. Check around all seals and around all covers.
Inspect the cooling system for leaks and repair any cooling system leaks. Check the hoses, the radiator fins, the radiator cap, and the drain area.
Inspect the lights for broken bulbs and for broken lenses. Replace any broken bulbs and any broken lenses.
Remove any trash buildup around the engine. Also, remove any dirt buildup that is on the top of the crankcase guard.
Inspect the engine covers and the guards for damage, for loose bolts, and for missing bolts.
Inspect the condition of the steps and of the handholds. Inspect the steps and the handholds for cleanliness. If necessary, repair the steps or clean the steps. Inspect the Rollover Protective Structure (ROPS) for damage. Consult your Caterpillar dealer for any necessary repairs.
Inspect the operator compartment for cleanliness. Remove any trash buildup and any dirt buildup.
Inspect the instrument panel. Repair any broken gauges and any broken lights. Make sure that the horn, the backup alarm, and the lights are working properly.
Accumulated grease and oil on a machine is a fire hazard.Remove debris with steam cleaning or high pressure water, at the specified interval in the Maintenance Interval Schedule or each time any significant quantity of oil is spilled on the machine.
Daily Checks
After you inspect the machine, perform the daily maintenance that is listed in the maintenance interval schedule. Perform the daily maintenance before you mount the machine in order to operate the machine.Refer to Operation and Maintenance Manual, "Maintenance Interval Schedule" for the correct procedures for the following checks:
"Backup Alarm - Test"
"Boom Pivot Pins - Lubricate"
"Brakes, Indicators and Gauges - Test"
"Cooling System Coolant Level - Check"
"Counterweight Cylinder Bearings - Lubricate"
"Counterweight Hinge Pins - Lubricate"
"Engine Air Precleaner - Clean"
"Engine Oil Level - Check"
"Fairlead Sheave - Lubricate"
"Fuel System Water Separator - Drain"
"Fuel Tank Water and Sediment - Drain"
"Hook and Wire Cable - Inspect"
"Hydraulic System Oil Level - Check"
"Seat Belt - Inspect"
"Sheave Block Bearings - Lubricate"
"Transmission System Oil Level - Check"