CAMSHAFT 3054756 - Caterpillar

Illustration 17 g02790621
Remove bolts (19) .
Illustration 18 g02790636
Remove plate (20). Remove light assembly (21) .
Illustration 19 g02790743
Attach a suitable lifting device onto walkway assembly (22). The weight of walkway assembly (22) is approximately 130 kg (287 lb).
Illustration 20 g02790744
Illustration 21 g02790745
Remove bolts (23) and bolts (24) .
Illustration 22 g02790743
Use the suitable lifting device to remove walkway assembly (22). The weight of walkway assembly (22) is approximately 130 kg (287 lb).
Illustration 23 g02791223
Disconnect ground strap (25) .
Illustration 24 g02791226
Remove cover (26) .
Illustration 25 g02791229
Disconnect hose assemblies (27). Disconnect cable assembly (28). Disconnect brackets (29). Disconnect hoses (30) .
Illustration 26 g02791253
Disconnect harness assemblies (31). Disconnect cable assemblies (32) and cable assembly (33) .
Illustration 27 g02791260
Attach Tooling (C) and a suitable lifting device onto cab (34). The weight of cab (34) is approximately 2563 kg (5650 lb).
Illustration 28 g02791287
Secure rear hood panel (35) in the open position. Remove cover assembly (36) .
Illustration 29 g02791365
Remove pin assembly (37). Repeat this step for the remaining pin assemblies.
Illustration 30 g02791366
Remove bolt (38), washer (39), and mount (40). Repeat this step for the remaining mounts.
Illustration 31 g02791367
Use the suitable lifting device to remove cab (34). The weight of cab (34) is approximately 2563 kg (5650 lb).Installation Procedure
Install cab (34) in the reverse order of removal.
Tighten bolts (38) to a torque of 800 100 N m (590 74 lb ft).