CAMSHAFT AS 3096733 - Caterpillar

Illustration 1 g01180570
Direction to drive in the new lip seal (1) Housing (2) Oil side of the seal (3) Air side of the sealAdaptable To: The new 193-2200 Lip Seal replaces the old 9X-7743 Lip Seal on the front output shafts and the rear output shafts of the output transfer gear group. The new 223-3925 Bearing Cage replaces the old 115-0527 Bearing Cage and the new 223-3924 Bearing Cage replaces the old 6I-8496 Bearing Cage .Note: In order to use the new 193-2200 Lip Seal, the new 223-3924 Bearing Cage is required on the front side of the output transfer gear group, but the old 115-0527 Bearing Cage can be reused on the rear side of the output transfer gear group. If the 115-0527 Bearing Cage is used, drive a new 193-2200 Lip Seal into the 115-0527 Bearing Cage to the depth that is shown in Illustration 2 below.Note: Do not drive the seal to the bottom of the bore.
Illustration 2 g01180639
New 193-2200 Lip Seal in the old 115-0527 Bearing Cage (A) 19 mm (0.748 inch)The new 193-2200 Lip Seal with new bearing cages is effective with the following machines.
950G Series II (S/N: AXR320-UP; AXX1179,1183,1186-1189,1191-UP; AYB1004-UP; AYL2062-2063,2069-2070,2072,2074-2075,2077,2079-2085,2089-2093,2095,2097-2107,2109,2113-2124,2126-2188,2190-UP; BAA877,896,898-899,902,904-UP)
962G Series II (S/N: AXS380-UP; AXY378-379,381-UP; AYE667-UP; BAB676-678,680,683,686,688-UP; BAD397,403,406-UP)The 223-3924 Bearing Cage and the 223-3925 Bearing Cage are effective with the following machines.
950G Series II (S/N: AXR245,247-319; AXX390,392-399,401-409,411-1178; AYB722-1003; AYL109-2061; BAA370-876)
962G Series II (S/N: AXS369-379; AXY254-377; AYE440-666; BAB306-675; BAD298-396)These changes are adaptable to first production of the machines that are listed.