CAMSHAFT 3471133 - Caterpillar

Remove Steering Neutralizer Valves
start by:a) connection of anti-pivot link Cab and platform are shown removed for photo purposes only. Removal of the left side neutralizer valve is shown.
Release the pressure from the hydraulic system before any lines are removed or disconnected.
1. Disconnect tube assemblies (2) and (3) and hose assembly (1) from the valve. 2. Remove bolts (4). Remove steering neutralizer valve (5) from the machine.Install Steering Neutralizer Valves
1. Install steering neutralizer valve (1) on the machine. 2. Connect tube assemblies (3) and hose assembly (2) to the valve.3. Check the adjustment of striker (4). See NEUTRALIZER VALVES, TESTING AND ADJUSTING.Disassemble Steering Neutralizer Valves
start by:a) remove steering neutralizer valves 1. Remove boot (1) from valve body (2). 2. Remove plug (3) and O-ring seal (4).3. Remove spring (5) and valve spool (6) from the valve body. 4. Remove bolt (7), lockwasher and washer from the spool. 5. Remove plug (11) and O-ring seal (10).6. Remove spring (9) and ball (8) from the valve body. 7. Remove lip type seal (12) from the valve body.Assemble Steering Neutralizer Valves
1. Install the lip type seal with tooling (A) as shown. 2. Put ball (1) and spring (2) in position. Install O-ring seal (4) and plug (3) into the valve body. 3. Install washer (6), lockwasher and bolt (5) on valve spool (7).4. Put a small amount of oil on the valve spool and the lips of the lip type seal. 5. Put valve spool (7) and spring (10) in position in the valve body. Install O-ring seal (9) and plug (8). 6. Install boot (11) on the valve body.end by:a) install steering neutralizer valves