CAMSHAFT GP 3654287 - Caterpillar

Table 1
Text View Options    
Items     Details    
Avoid. Dist.     The positions of the Bucket Tip and machine receivers are used for avoidance zone proximity detection. The Avoid. Dist is the shortest distance between any one point and the closest avoidance zone.    
Bucket Name     The name of the current bucket of N/A if no bucket is defined. This text item is only available on excavator systems.    
Cut Adjust     When Cut adjustment is Off, the text field indicates "N/A". When Cut adjustment is On and adjustment is applied, the text field shows the larger of the applied cut adjustments for the bucket tips.    
Cut/Fill Left     Shows either Cut Left or Fill Left, as appropriate, for the left bucket tip. If a vertical offset is specified, the Cut or Fill is to the vertically offset position.    
Cut/Fill Right     Shows either Cut Right or Fill Right, as appropriate, for the right bucket tip. If a vertical offset is specified, the Cut or Fill is to the vertically offset position.    
Design Elev     Design elevation at the bucket tip with focus.    
Design Name     Displays the design name.    
Easting     Easting at the bucket tip with focus.    
Elevation     Elevation at the bucket tip with focus.    
GPS Acc. Mode     The selected GPS Accuracy mode is displayed. GPS Accuracy modes are fine, medium, and coarse.    
H. GPS Error     A measure of the horizontal GPS Accuracy. The text is red if the value exceeds the current GPS error limit. The text is blue if the value is close to the limit. Otherwise the text is black.    
Heading     Direction the machine is moving. Shown in degrees clockwise from the north.    
Layered Lift     Vertical Offset between the master alignment and the working surface when a layered lift is defined. Value is positive if the layered lift is above the master alignment, negative if the layered lift is below the master alignment, and "N/A" when no layered lift is defined.    
MA Offset     Offset from the bucket tip with focus to the master alignment. Also see the item "Offline" in this table.    
Northing     Northing at the bucket tip with focus.    
Offline     Offline distance from the bucket tip with focus to the selected alignment. If a horizontal offset is specified, the offline distance is to the horizontally offset position. Also see the item "MA Offset" in this table.    
Offline L     This value is