CAMSHAFT 4H7479 - Caterpillar

TARGET="_parent"> Track Adjustment - Adjust
Windows - Clean
Window Wiper - Inspect/Replace
Every 10 Service Hours or Daily for First 100 Hours
Boom, Stick and Bucket Linkage - Lubricate
Every 10 Service Hours or Daily
Cooling System Level - Check
Engine Oil Level - Check
Fuel System Water Separator - Drain
Fuel Tank Water and Sediment - Drain
Hydraulic System Oil Level - Check
Indicators and Gauges - Test
Seat Belt - Inspect
Track Adjustment - Inspect
Travel Alarm - Test
Undercarriage - Check
Walk-Around Inspection
Every 10 Service Hours or Daily for Machines Used in Severe Applications
Boom, Stick and Bucket Linkage - Lubricate
Every 50 Service Hours or Weekly
Boom, Stick and Bucket Linkage - Lubricate
Every 100 Service Hours of Continuous Hammer Use
Hydraulic System Oil Filter - Replace
Initial 250 Service Hours
Engine Valve Lash and Fuel Injector Timing - Check
Final Drive Oil - Change
Hydraulic System Oil Filter - Replace
Hydraulic System Oil Return Filter - Replace
Swing Drive Oil - Change
Every 250 Service Hours or Monthly
Air Conditioner - Test
Condenser (Refrigerant) - Clean
Cooling System Hoses - Inspect
Engine Oil and Filter - Change
Final Drive Oil Level - Check
Fuel System Priming Pump - Operate
Fuel System Secondary Filter Number One - Replace
Fuel System Water Separator Element - Replace
Swing Bearing - Lubricate
Swing Drive Oil Level - Check
V-Belts - Inspect/Adjust/Replace
V-Belts - Inspect/Adjust/Replace
Every 250 Service Hours of Partial Hammer Use (50% of Service Hours)
Hydraulic System Oil Filter - Replace
Every 250 Service Hours of Continuous Hammer Use
Hydraulic System Oil Return Filter - Replace
Every 500 Service Hours or 3 Months
Engine Crankcase Breather - Clean
Fuel System Secondary Filter Number Two - Replace
Fuel Tank Cap and Strainer - Clean
Hydraulic System Oil Filter - Replace
Every 500 Service Hours of Partial Hammer Use (50% of Service Hours)
Hydraulic System Oil Return Filter - Replace
Every 600 Service Hours of Continuous Hammer Use
Hydraulic System Oil - Change
Every 1000 Service Hours or 6 Months
Battery - Clean
Battery Hold-Down - Tighten
Hydraulic System Oil Return Filter - Replace
Swing Drive Oil - Change
Every 1000 Service Hours of Partial Hammer Use (50% of Service Hours)
Hydraulic System Oil - Change
Every 2000 Service Hours or 1 Year
Engine Governor Oil Supply Screen - Clean/Inspect/Replace
Engine Valve Lash and Fuel Injector Timing - Check
Final Drive Oil - Change
Hydraulic System Oil - Change
Refrigerant Receiver-Dryer - Replace
Swing Gear - Lubricate
Every 3000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
Every 6000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change
Every 3 Years
Seat Belt - Replace