4P9028 CAMSHAFT Caterpillar parts
140G, 143H, 14G, 160G, 160H, 3306, 3306B, 528, 627E, 627F, 815B, 966D, 966F, 966F II, 972G, 973, D6D, D6E, D6G, D6G2 XL, D7G, D7H
Rating:
Alternative (cross code) number:
CA4P9028
4P-9028
4P9028
CA4P9028
4P-9028
4P9028
Weight: 11 pounds 5 kg.
GEN SET ENGINE, WHEEL TRACTOR,
Compatible equipment models: 4P9028:
Information:
The Electronic Control Module (ECM) detects the following conditions:
The 8 Volt supply is less than 7.2 Volts DC for more than one second.
The ECM has been powered for more than three seconds.
Diagnostic code 168-01 is not active at the same time.System Response:The ECM will log the diagnostic code. The warning light on the control panel will flash while this diagnostic code is active. An active diagnostic code may not cause any noticeable effect on engine response unless the voltage drops below 6.5 Volts DC. Possible Performance Effect:The engine may be limited to low idle.Troubleshooting:If this diagnostic code is observed, check the associated wiring on the engine.Test Step 1. Refer to the Engine Electrical Schematic.Results:
OK - STOP
The 8 Volt supply is less than 7.2 Volts DC for more than one second.
The ECM has been powered for more than three seconds.
Diagnostic code 168-01 is not active at the same time.System Response:The ECM will log the diagnostic code. The warning light on the control panel will flash while this diagnostic code is active. An active diagnostic code may not cause any noticeable effect on engine response unless the voltage drops below 6.5 Volts DC. Possible Performance Effect:The engine may be limited to low idle.Troubleshooting:If this diagnostic code is observed, check the associated wiring on the engine.Test Step 1. Refer to the Engine Electrical Schematic.Results:
OK - STOP
Caterpillar SIS machinery equipment:
Caterpillar SIS
D7H & D7H LGP SERIES II TRACTORS / POWERSHIFT / 4AB05500-UP (MACHINE) POWERED BY 3306 ENGINE »
4P-9028
CAMSHAFT
D7G TRACTOR POWERSHIFT 65V07701-UP (MACHINE) POWERED BY 3306 ENGINE »
4P-9028
CAMSHAFT
966 F SERIES II WHEEL LOADER 8BG02000-02680 (MACHINE) POWERED BY 3306 ENGINE »
4P-9028
CAMSHAFT AS
966F SERIES II WHEEL LOADER 8BG02681-UP (MACHINE) POWERED BY 3306 ENGINE »
4P-9028
CAMSHAFT
D6G TRACK-TYPE TRACTOR BWJ00001-UP (MACHINE) POWERED BY 3306 ENGINE »
4P-9028
CAMSHAFT
Caterpillar parts catalog:
Parts camshaft Caterpillar catalog:
3517364
CAMSHAFT GP
621H, 623H, 627H, 980K, 980K HLG
621H, 623H, 627H, 980K, 980K HLG
1142513
CAMSHAFT GP
G3412
G3412
3224916
CAMSHAFT GP
226B, 226B3, 232B, 242B, 247B, 247B3, 257B
226B, 226B3, 232B, 242B, 247B, 247B3, 257B
4N9129
CAMSHAFT GP-SINGLE
772B, 773B
772B, 773B
4W8252
CAMSHAFT GP
3612
3612
2853785
CAMSHAFT GP
3516C
3516C
3962615
CAMSHAFT GP
924K, 930K, 938K, D6K2
924K, 930K, 938K, D6K2
2837639
CAMSHAFT GP
3512C
3512C
3811939
CAMSHAFT GP
3512
3512
2342674
CAMSHAFT GP
3054E, 315C, 432E, M313C, M315C, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
3054E, 315C, 432E, M313C, M315C, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B