CAMSHAFT 6L7607 - Caterpillar

Illustration 10 g00823890
Use Tooling (D) to force bevel pinion (27) from bearing cone (33) and planetary carrier (31).
Illustration 11 g00824243
Use Tooling (E) to remove bearing cone (34) from planetary pinion (27).
Illustration 12 g00824263
Remove bearing cups (35) from carrier (31).
Illustration 13 g00824265
Remove bolts (36).
Remove support bracket (37) and shims (38) from the housing.
Remove bolts (39).
Remove bevel gear (40) from housing (41).
Illustration 14 g00824268
Attach Tooling (F) and a suitable lifting device to brake housing (42).
Remove bolts (43).
Remove brake housing (42) from the final drive housing (44). The weight of brake housing (42) is approximately 150 kg (335 lb).
Illustration 15 g00824819
Illustration 16 g00824349
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove bolts and washers (45).
Remove retainer (46) and thrust washer (47).
Remove hub (48), friction discs, and brake plates (49).
If necessary, remove ring (50) from hub (48).
Remove thrust washer (51).
Illustration 17 g00824351
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove bolts (52) slowly.
Remove retainer (53), ring (54), and ring seal (55) from brake housing (42).
Illustration 18 g00824691
Remove bolts (56), plate (57), shim pack (58), piston (59), and spring (60) from brake housing (42).
Illustration 19 g00824366
Use Tooling (G) to separate brake housing (42) and bearing cone (61) from housing (41).
Attach a suitable lifting device and Tooling (F) to brake housing (42).
Remove brake housing (42) from housing (41). The weight of brake housing (42) is approximately 77 kg (170 lb). The weight of housing (41) is approximately 25 kg (55 lb).
Illustration 20 g00824415
The component will be destroyed if the component is removed.
If necessary, remove bearing cone (61) from housing (41).
Remove bearing cups (62) and (64) from brake housing (42).
The component will be destroyed if the component is removed.
If necessary, remove bearing cone (65) from housing (41).
Remove O-ring seal (63) from brake housing (42).