CAMSHAFT-FUEL PUMP 6N8447 - Caterpillar

Illustration 36 g03667521
Attach a suitable lifting device to pump stack (34). The weight of pump stack (34) is approximately 82 kg (181 lb). Use the suitable lifting device in order to position pump stack (34). Install bolts (35).
Illustration 37 g03667516
Illustration 38 g03667416
Install hose assembly (31) and hose assembly (33) as one unit.
Connect hose assembly (32).
Connect tube assembly (30).
Illustration 39 g03667414
Connect hose assembly (29).
Illustration 40 g03667392
Position hose assemblies (28). Connect clamps (25).
Install hose assembly (27). Attach cable strap (26).
Connect hose assemblies (24).
Illustration 41 g03667491
Illustration 42 g03667469
Illustration 43 g03667491
Attach Tooling (A) and a suitable lifting device to plate assembly (22). The combined weight of plate assembly (22) and all of the valves and hose assemblies is approximately 90 kg (198 lb). Use Tooling (A) and the suitable lifting device in order to lift plate assembly (22) into position.
Install nuts (23).
Illustration 44 g03667447
Connect hose assemblies (21).
Illustration 45 g03667422
Install bracket (20). Connect clamp (19).
Connect harness assemblies (18).
Connect hose assembly (17).
Illustration 46 g03667209
Install hose assembly (16).
Connect hose assembly (15).
Illustration 47 g03667205
Install hose assemblies (11) and (12).
Install clamps (13).
Connect hose assemblies (10) and (14).
Illustration 48 g03667198
Install tube assembly (9).
Install clamps (8).
Install hose assemblies (7).
Illustration 49 g03715572
Install hose assembly (4).
Attach cable straps (5).
Connect hose assemblies (3) and hose assembly (6).
Illustration 50 g03667106
Install hose assemblies (1).
Install clamps (2).
Fill the transmission oil. Refer to Operation and Maintenance Manual, "Transmission Oil - Change" for the correct filling procedure.
Turn the battery disconnect switch to the ON position. End By:
Install the implement pump.
Install the rear drive shaft.
Install the center drive shaft.
Install the clean emissions module or the muffler.
Install the expansion tank.
Install the air cleaner.
Install the hydraulic tank.