CAMSHAFT 9L9589 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8T-5255     Hydraulic Jack     1    
B     180-3032     Stand     1    
C     132-8223     Power Pack     1    
1U-6221 Hydraulic Torque Wrench Assembly     1    
1U-6222 46mm Hex Link     1    
D     183-4799     Track Roller Lifting Fork     1    Note: The procedure to install any of the track carrier rollers is identical. The procedure that follows is for one of the track carrier rollers.
Make sure that the shaft of the track carrier roller and the bore in the mounting bracket are clean and free of dirt.
Illustration 1 g00597229
Use Tooling (D) and a suitable lifting device in order to lift track carrier roller (2). The weight of track carrier roller (2) is approximately 57 kg (125 lb). Carefully position track carrier roller (2) to the mounting bracket.Note: Be sure that track carrier roller (2) is centered between the track links.
Illustration 2 g00597213
Illustration 3 g00597221
Use Tooling (C) in order to tighten bolt (1) to a torque of 1000 125 N m (740 90 lb ft).
Illustration 4 g00597205
Use Tooling (A) in order to lift the track assembly. Remove Tooling (B). Lower the track assembly onto the track carrier roller. Remove Tooling (A) .
Illustration 5 g00595011
Personal injury or death can result from grease and oil coming out of the relief valve.Grease and oil are under high pressure coming out of the relief valve and can penetrate the body.Do not watch the relief valve to see if grease is escaping. Watch the track or track adjustment cylinder to see if the track is being loosened. Make sure the vent holes are clean before the tension is released on the track.
Tighten relief valve (1) for the track adjuster. Adjust the tension of the track assembly. Refer to Operation and Maintenance Manual, "Track Adjustment - Adjust".