CAMSHAFT 9Y1722 - Caterpillar

The CAN device firmware files allow you to upgrade the pitch sensor to the current firmware versions. In order to complete the upgrade, use the display. The controls device firmware files are available on download page of SIS Web.The AccuGrade system contains one pitch sensor.In order to upgrade the firmware of the pitch sensor, complete the following steps:
Use a computer to copy the upgrade files to the root folder of a data card.
Place the data card, with the firmware on the root directory, into the display.Note: For the latest revision of firmware, use "SIS Web".
Press the "OK" button while pressing the "Power" button in order to start up the display in the "Service" mode.
At the "Setup Menu" screen, press the "Installation" soft button in order to show the selections that are available in the "Setup Menu – Installation" menu.
Press the "Up" arrow or press the "Down" arrow until "Upgrade Firmware" is highlighted.
Illustration 1 g01473152
Press the "OK" button. If at least one device was detected on the CAN bus, a screen similar to Illustration 2 will appear.The "Upgrade Firmware" screen will list all of the correctly named .s files that are in the root folder of the data card and that are applicable for the machine type that is selected. The version of each file will also be shown.
Illustration 2 g01473257
Press the "Up" arrow or the "Down" arrow in order to highlight the "AS21" file.
Press the "OK" button. A screen that is similar to Illustration 3 will appear.The screen will display the current application and loader version of the pitch sensor. It also prompts you to select which device to upgrade.
Illustration 3 g01473993
Press the "OK" button. A screen that is similar to Illustration 4 will appear.The firmware upgrade begins. A progress bar appears.Note: Do not remove the card or turn off the display during the firmware upgrade.
Illustration 4 g01473260
When the upgrade is completed, a text message will appear in order to inform you of the success or failure of the upgrade.