CAMSHAFT KIT 9Y3232 - Caterpillar

ACTION REQUIRED
Install new 433-6640 Bracket As to secure cables.
OWNER NOTIFICATION
Owners in the following countries will receive the attached Owner Notification:
US
Canada
SERVICE CLAIM ALLOWANCES
Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
100% 100% 0% 0% 0% 0%
This is a 2.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
EXAMPLE COPY OF OWNER NOTIFICATION
XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999
PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING BRACKET AS TO SUPPORT CABLE GP-POWER TRAIN ON CERTAIN 795F AC OFF-HIGHWAY TRUCKS
MODELS INVOLVED - 795F AC Off-Highway Trucks
Dear Cat Product Owner:
The bracket needs to be installed on the products listed below. The existing cables are unrestrained and can contact other components in the area resulting in ground faults. You will not be charged for the service performed.
Contact your local Cat dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service.
If you are no longer the owner of this product(s), please contact your local Cat dealer so that our records can be updated.
Please refer the dealer to their Service Letter dated 02Dec2013 when scheduling this service.
We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime.
Caterpillar Inc.
Identification #(s)
Attached to 02Dec2013 Service Letter
Rework Procedure
Remove and retain (1) 310-1703 Plate, 314-9325 Block, and 314-9323 Block from the Cable Gp. The remaining Spacers, Washers, Nuts, Bolts, and additional Plate will not be reused.
Image1.1.1
Remove (4) Bolts and Washers from housing. These will not be reused.
Image1.2.1
Mount the 433-6640 Bracket As to the housing with (4) 7X-0613 Washers and (4) 8C-3121 Bolts. (Cables removed from view for clarity)
Image1.3.1
Place the 310-1703 Plate, 314-9325 Block, and 314-9323 Block (Retained earlier) around cables in orientation shown and the secure plate and blocks to the 433-6640 Bracket As. with (2) 316-8298 Spacers, (3) 8T-4121 Washers, (2) 8T-4178 Bolts, and (1) 344-5675 Nut.
Image1.4.1