CANOPY 4223783 - Caterpillar

1. Fasten Tool (A) to flywheel (2). Remove bolts (1) and flywheel (2) from the crankshaft. The weight of the flywheel is approximately 46 kg (101 lb). 2. Remove gear (3) from the flywheel if a replacement is necessary.Install Flywheel
1. Heat gear (1) to a maximum temperature of 315°C (600°F). Install gear (1) on the flywheel. Make sure the side of the gear with the chamfer is away from the flywheel. 2. Fasten Tool (A) to the flywheel. Put a 5/8 in-18 NF × 101 mm (4 in) Long Guide Bolt (2) in the crankshaft. Install flywheel (3). The weight of the flywheel is approximately 46 kg (101 lb).3. Put clean engine oil or 4C-5593 Anti-Sieze Compound on the threads of the bolts that hold the flywheel in place on the crankshaft. Install the bolts. Tighten the bolts to a torque of 271 27 N m (200 20 lb ft).