0873533 CAP Caterpillar parts
320C, 320C FM, 320D, 320D L, 320D LRR, 320D2 L, 322 FM L, 325, 325 L, 325 LN, 325C, 325D, 325D L, 328D LCR, 329D, 329D L, 330, 330 FM L, 330 L, 330C L, 330D, 330D L, 336D, 336D2, 793F, 793F AC, 793F C...
Rating:
Alternative (cross code) number:
CA0873533
087-3533
0873533
CA0873533
087-3533
0873533
Weight: 0.11 pounds 0 kg.
Information:
LENGTH
45
mm
THREAD SIZE
M48X5.0
EXCAVATOR, WHEEL LOADER,
Compatible equipment models: 0873533:
Number on catalog scheme:
1
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the governor. Refer to Disassembly and Assembly, "Governor - Remove".
Remove the side covers. Refer to Disassembly and Assembly, "Lifter Group - Remove and Install".
Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: For information on reusability of the camshaft, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8097, "Camshaft Measurement", Guideline For Reusable Parts And Salvage Operations, SEBF8146, "Visual Inspection of Camshafts", and Guideline For Reusable Parts And Salvage Operations, SEBF8251, "Specifications for Measurement of Camshafts in 3114/3116 Engines". For information on reusability of the camshaft gear, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8045, "Timing Gears for All Engines".Note: The air compressor was removed in order to accommodate the engine repair stand.Note: It is not necessary to remove the cylinder head for removal of the camshaft.
Turn the crankshaft to top center compression stroke for the No. 1 piston. Install the timing bolt in the flywheel. This is for timing during installation.
Illustration 1 g01007643
Typical example
Ensure that timing mark (1) on the camshaft gear is aligned with timing mark (2) on the idler gear.
Illustration 2 g01007645
Remove bolts (4) and camshaft retainer plate (6).
Remove camshaft gear (5) and camshaft (3) from the cylinder block.
Start By:
Remove the governor. Refer to Disassembly and Assembly, "Governor - Remove".
Remove the side covers. Refer to Disassembly and Assembly, "Lifter Group - Remove and Install".
Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: For information on reusability of the camshaft, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8097, "Camshaft Measurement", Guideline For Reusable Parts And Salvage Operations, SEBF8146, "Visual Inspection of Camshafts", and Guideline For Reusable Parts And Salvage Operations, SEBF8251, "Specifications for Measurement of Camshafts in 3114/3116 Engines". For information on reusability of the camshaft gear, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8045, "Timing Gears for All Engines".Note: The air compressor was removed in order to accommodate the engine repair stand.Note: It is not necessary to remove the cylinder head for removal of the camshaft.
Turn the crankshaft to top center compression stroke for the No. 1 piston. Install the timing bolt in the flywheel. This is for timing during installation.
Illustration 1 g01007643
Typical example
Ensure that timing mark (1) on the camshaft gear is aligned with timing mark (2) on the idler gear.
Illustration 2 g01007645
Remove bolts (4) and camshaft retainer plate (6).
Remove camshaft gear (5) and camshaft (3) from the cylinder block.
Cat SIS web machinery list:
Parts cap Caterpillar catalog:
311, 311B, 312, 312B, 320 L, 320B, 320C, 323D L, 323D LN
561D, 834B, 834G, 834H, 836, 836G, 844, 844H, 844K, 854G, 854K, 988B, 988G, 988H, 988K, 990, 990 II, 990H, 990K, 992C, 992D, 992G, 992K, 993K, D5B, D5E, D6D, D6E SR
24H, 24M, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 834G, 834H, 834K, 836G, 836H, 836K, 844, 844H, 844K, 8A, 8S, D7E, D7E LGP, D7H, D7R, D7R II, D7R XR, D8L, D8N...
325B L, 350, 854G, 938G, 950G, 972G, 992G, AP-1000B, AP-800C, AP-900B, BG-225B, BG-2455C, BG-245C, IT38G
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 14...
621H, 621K, 627H, 627K, 627K LRC, 824G, 824G II, 824H, 826G, 826G II, 826H, 844, 844H, 844K, D9R, D9T
795F AC, 795F XQ, 797B, 797F
330, 330 FM L, 330 L, 345B, 345B II, 345B II MH, 345B L, 350, 365B, 365B II, 365B L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5080, 5090B, E450, PS-200B, W345B II
320C
854G, 854K, D10, D11N, D11R, D11T
844, 844H, 844K
844, 844H, 844K, D8L, D9N
4E8161
CAP-LOWER
844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992G, 992K
844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992G, 992K
4E8160
CAP-UPPER
844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992G, 992K
844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992G, 992K
4E8155
CAP-LOWER
844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992G, 992K
844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992G, 992K
4E8154
CAP-UPPER
844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992G, 992K
844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992G, 992K
4P7882
CAP
770G, 770G OEM, 773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 793F AC, 795F AC, 795F XQ, 834G, 834H, 834K, 836G, 836H, 836K, 844, 844H, 844K, 854K, 988G, 988H, 988K, 990, 990 II, 990H, 990K, 992...
770G, 770G OEM, 773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 793F AC, 795F AC, 795F XQ, 834G, 834H, 834K, 836G, 836H, 836K, 844, 844H, 844K, 854K, 988G, 988H, 988K, 990, 990 II, 990H, 990K, 992...
1968489
CAP-DUST
950F II, 960F
950F II, 960F
980G, 980G II, 980H
1058712
CAP-BEARING END
980G, 980G II, 980H
980G, 980G II, 980H
824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 980G, 980G II, 980H, 980K, 980K HLG, AD30
525D, 535D, 545D, 555D, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 966G, 966G II, 966H, 966K, 966M, 966M XE, 972G, 972G II, 972H, 972K, 972M, 972M XE, 980G, 980G ...
824G, 825G, 826G, 980G, 980G II, 980H, AD55B
1380910
CAP-RETAINER
365B, 5080, 988G, 990, 990 II, 992G
365B, 5080, 988G, 990, 990 II, 992G