CAP 0944199 - Caterpillar

2. Remove covers (1) and (2). 3. Disconnect five lines (3) connected to the control valve. 4. Remove two bolts (4) and slide boot (5) up the control linkage rod. 5. Remove the cotter pin and pin (6) to disconnect control linkage rod (7). 6. Remove three bolts (8) and control valve (9).Install Bulldozer Tilt Control Valve
1. Put control valve (1) in position on the machine and install the three bolts that hold it. 2. Put control linkage rod (2) in position. Install pin (3) and the cotter pin that holds it. 3. Slide boot (4) to position and install bolts (5) that hold it. 4. Connect five lines (6) to the control valve. 5. Put covers (7) and (8) in position and install the bolts that hold them.Disassemble Bulldozer Tilt Control Valve
START BY: a) remove bulldozer tilt control valve 1. Remove housing (2) from valve body (1). 2. Remove O-ring seal (3) and seal (4) from housing (2). 3. Remove two bolts (5) and housing (6) from the valve body.4. Remove the O-ring seal from housing (6). 5. Remove valve spool (7) from the valve body. 6. Make a compression of spring (8) with tooling (A) as shown. 7. Remove retainers (9) and spring (8) from valve spool (7). 8. Remove bolts (10) and make a separation of the three sections of the valve body.9. Remove the O-ring seals from the sections of the valve body.Assemble Bulldozer Tilt Control Valve
1. Install O-ring seals (1) in the sections of the valve body.2. Put the three sections of the valve body in position and install the bolts that hold them together. 3. Put retainers (3) and spring (4) in position on valve spool (2). 4. Make a compression of spring (4) with tooling (A) and install retainers (5) as shown. 5. Install valve spool (2) in the valve body. 6. Put O-ring seal (6) in position in housing (7). Install housing (7) and the bolts that hold it in position. 7. Install seal (8) in housing (10) with tooling (B).8. Put O-ring seal (9) in position in housing (10). 9. Put oil on seal (8) and put housing (10) in position on the valve body.END BY: a) install bulldozer tilt control valve