CAP 1225335 - Caterpillar

Introduction
This Special Instruction provides information to improve the cab sealing on certain D series Excavators. The current cab design has some leaking points in areas such as the console, HVAC holes or around the window frame. Follow the procedure below to improve the cab sealing performance.Required Parts
Table 1
Qty    New Part Number    Part Name    Former Part Number    
2     477-7578     Seal     189-2702    
2     185-8161     Insulator        
2 (118mm)     5P-5927     Seal        
2     475-4173     Insulator        Procedure
Illustration 1 g03842990
Illustration 2 g03842942
Location A (1) Top of the bracket (2) 189-2702 Seal
Remove the 189-2702 Seal on top of the bracket of the 176-1958 Cab Window Gp .
Illustration 3 g03842943
Location A (3) Top of the bracket (4) 477-7578 Seal
Install the 477-7578 Seal on top of the bracket of the 176-1958 Cab Window Gp .
Illustration 4 g03842984
Location B (5) 185-8161 Insulator
Remove the former 185-8161 Insulator behind the console support for both LH & RH.
Clean the floor surface before adding the insulators.
Illustration 5 g03842986
Location B (6) 5P-5927 Seal (7) 185-8161 Insulator HE01
Add the new 185-8161 Insulator behind the console support for both LH & RH.
Add the new 5P-5927 Seal on the front of the console support.
Illustration 6 g03842987
Location C (8) 475-4173 Insulator
Add the 475-4173 Insulator around the harness on the left-hand console support.