CAP 1425787 - Caterpillar

Table 1
Required Parts
Item Qty Part Number Description
1 1 372-7280 Latch As The improved Latch Assemblies are adaptable to the following machines:
950M (S/N: EMB1-350)
950M (S/N: FTR1-304)
962M (S/N: EJB1-186)
962M (S/N: F2T1-129)
966M XE (S/N: P6C1-406)
966M (S/N: DYC1-550)
966M (S/N: KJP1-843)
972M XE (S/N: EDW1-271)
972M (S/N: A8P1-441)
972M (S/N: JPR1-400)
980M (S/N: KRS1-579)
980M (S/N: N8T1-374)
982M (S/N: F9A1-221)
982M (S/N: K1Y1-378)The improved Latch Assemblies are effective in production in the following machines:
950M (S/N: EMB351-UP)
950M (S/N: FTR305-UP)
962M (S/N: EJB187-UP)
962M (S/N: F2T130-UP)
966M XE (S/N: P6C407-UP)
966M (S/N: DYC551-UP)
966M (S/N: KJP844-UP)
972M XE (S/N: EDW272-UP)
972M (S/N: A8P442-UP)
972M (S/N: JPR401-UP)
980M (S/N: KRS580-UP)
980M (S/N: N8T375-UP)
982M (S/N: F9A222-UP)
982M (S/N: K1Y379-UP)Procedure
Illustration 1 g06000174
(A) Round Latch Retainer
If unable to open left-hand cab door due to left-hand door latch failure, remove round latch retainer (A) in the Latch As on the right-hand cab window to gain entrance to cab. Use needle nose pliers to engage two holes provided for tool insertion or use adjustable pliers on outside diameter of retainer. Turn counterclockwise to remove round latch retainer. Refer to Illustration 1.
After gaining entrance to cab, replace round latch retainer (A) in the Latch Assembly. Tighten to a 1/2 turn past the contact point.
Illustration 2 g06000194
(1) 372-7280 Latch As
Remove plastic door panel and hardware on the left-hand cab door. Replace the existing Latch Assembly on the left-hand cab door with a new 372-7280 Latch As (1). Refer to Illustration 2.
Reinstall plastic door panel and hardware on the left-hand cab door.