CAP 1748785 - Caterpillar

Illustration 15 g03612764
Use the cap, shims (20B), the four bolts, and the four nuts to install tilt cylinder (18). For instructions on shimming, refer to ""Procedure for Shimming"". Tighten the bolts to a torque of 520 70 N m (384 52 lb ft).
Illustration 16 g03614357
Use pin (11), retainer (12), bolt (13A), and washer (13B) to install tilt cylinder (18) to right push arm (4) .
Illustration 17 g00620882
Use two nuts (27) to install two elbows (40) to the bulldozer blade. Install four O-ring seals (35) on elbows (40). Tighten nuts (27) to a torque of 23 2 N m (17 1 lb ft).
Illustration 18 g01012544
Connect hose (26) to the elbow on the bulldozer blade. Tighten the hose to a torque of 45 4 N m (33 3 lb ft).
Illustration 19 g01012545
Connect hose (24) to the elbow on the bulldozer blade. Tighten the hose to a torque of 45 4 N m (33 3 lb ft).
Illustration 20 g01235367
Connect hoses