CAP-VALVE STEM 1992190 - Caterpillar

Assembly Procedure
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.
Illustration 1 g00907940
Install seal (17) to pump (1).
Install lock washer (16) to pump (1).
Illustration 2 g00907935
Install seals (14) and (15) to plate (13).
Illustration 3 g00907934
Install plate (13) to pump (1).
Illustration 4 g00907930
Install driven gear (12) and drive gear (11) to pump (1).
Illustration 5 g00907929
Install plate (10) to pump (1).
Illustration 6 g00907926
Install O-ring seal (9) to body (8).
Illustration 7 g00907924
Install body (8) to pump (1).
Illustration 8 g00907335
Install seals (7) and (6) to pump (1).
Install O-ring seal (5) to pump (1).
Illustration 9 g00907332
Install cover (4) and bolts (3) to pump (1).
Illustration 10 g01398816
Install gasket (2) and pump (1). End By:
Install the secondary steering pump and motor. Refer to Disassembly and Assembly, "Secondary Steering Pump and Motor- Install".