CAP 2376037 - Caterpillar

Illustration 1 g06226741
Typical example
Table 1
Item Qty Part Specification Description
All bores must be free of paint. Use the 5P-0960 Grease Cartridge to coat all bores for the pins, the stick, the upper frame, and the cylinder pin bores.
1 2 166-1495 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
2 2 489-3008 Sleeve Bearing Inside diameter before assembly is 90..21 0.040 mm (3.552 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
3 1 4I-4618 Pin As Diameter is 79.850 0.025 mm (3.1437 0.0010 inch).
4 1 176-2278 Pin Diameter is 79.850 0.025 mm (3.1437 0.0010 inch).
5 1 346-7276 Pin As Diameter is 89.850 0.025 mm (3.5374 0.0010 inch).
6 As required, use the following shims to adjust the maximum lateral clearance of 1.0 mm (0.04 inch). The steel shim should be located at the boom side:
1 113-2127 Shim Thickness is 0.5 mm (0.02 inch).
2 093-0084 Shim Thickness is 1.0 mm (0.04 inch).